Above Ground Pool Removal in Broomfield, CO

Most backyard pools in Broomfield begin as a great summer idea. A hot July afternoon on the Front Range makes an above ground pool seem like the perfect backyard addition. Families set up the steel walls, level out a base, fill it up, and enjoy it for a season or two.

Then the winter arrives. Repeated freezing cycles work on the water level, the vinyl liner thins out, and the structure starts to lean. What was once an inviting retreat turns into a rusted ring sitting over a patch of dead grass, taking up valuable yard space year after year.

AMI Junk Hauling handles complete pool teardown and clearing across the local area. Our crew dismantles the metal frame, cuts out the ruined liner, removes the pump equipment, and addresses the heavy sand pad underneath so you can reclaim your property.

Pool Tear Down for Every Stage of Wear in Broomfield

Structures in this part of Colorado face severe seasonal changes that destroy thin metal walls and vinyl liners faster than in milder climates. We take down pools in all stages of failure across the local area.

During the first couple of years, high elevation sun exposure sends intense ultraviolet rays directly into the resin top rails and exposed vinyl. The intense sunlight bakes plastic components until they chalk, turn brittle, and snap under pressure. Water line gaskets dry out, creating hidden micro-leaks along the bottom track. Meanwhile, strong wind gusts along the base of the mountains buffet empty or half-filled pools, flexing the thin steel wall until the seam bolts strip out.

By the third to fifth year, winter weather inflicts heavy structural damage. Water trapped inside the pool freezes solid and expands against the interior walls. When ice pushes outward against steel weakened by summer sun, the vertical posts buckle. Frost heave under the ground shifts the track out of alignment. Once a pool leans even two inches off level, the structural integrity vanishes, making it unsafe to refill.

By decade one, moisture trapped between the sand base and the bottom metal track causes severe corrosion. Steel walls rust from the ground up, hiding structural weakness behind intact vinyl. When the liner finally splits, thousands of gallons of water wash away the supporting sand, leaving behind a sharp, collapsed sheet of rusted steel, twisted aluminum top rails, rotting filter hoses, and a waterlogged sand pad. We handle rusted frames, collapsed walls, intact units, and half-dismantled weekend projects, clearing away all metal, vinyl, pumps, and underlying material.

How We Dismantle and Load Heavy Pool Materials

The physical footprint of an above ground pool stretches anywhere from fifteen to thirty feet across, creating a massive volume of rigid materials. Taking one apart requires a strict, methodical sequence to prevent sharp sheet metal from snapping under tension and causing injury.

We start by assessing gate access and establishing a clear path to our haul vehicle. Before cutting a single piece, our crew verifies that all standing water has been completely drained from the basin. Working around a pool with standing water is dangerous because the unsupported weight can cause sudden wall collapse. Once drained, we disconnect all electrical lines to the pump unit and unclamp the filtration plumbing.

Dismantling begins at the top. We remove the resin or aluminum top caps and top rails one section at a time. Next, we unbolt the vertical uprights supporting the outer ring. The outer steel wall is held under tension; releasing it improperly can cause the thin metal to spring out unpredictably. Our team unrolls the metal sheet in a controlled manner, cutting it into manageable five-foot sections using heavy-duty shears or reciprocating saws before hauling it through the side gate.

The hardest physical labor comes after the frame is gone. Underneath every vinyl liner sits a sand base weighing anywhere from two to five tons. We shovel, wheelbarrow, or machine-load the heavy sand out of your yard based on gate clearances. Whether navigating narrow side yards or wide gate openings, we clear out every fraction down to the bare earth.

Factors That Determine Your Pool Teardown Quote

We do not publish fixed rate tables because every backyard setup in Broomfield presents an unique combination of physical challenges, material volumes, and access constraints. The size of the unit is where the quote begins, as a thirty-foot round pool contains vastly more steel walling, vinyl, and underlying base sand than a twelve-foot model.

Seasonal weather conditions also play a role in planning the job. Working after heavy spring rains or winter thaws creates muddy ground conditions that make moving multi-ton sand pads by hand significantly more labor-intensive. Dry fall days allow faster loading and easier site transport.

Access path distance is another key factor. If our crew can park directly adjacent to a wide double gate leading into the yard, loading moves quickly. If materials must be hand-carried across long backyards, around decks, or down sloped side paths, the additional labor hours adjust the final estimate. Surrounding decks anchored to the pool structure also expand the project scope, requiring dedicated teardown time for pressure-treated timber, footings, and railings. Finally, the choice to haul away the heavy sand base versus spreading it on site affects overall tonnage charges.

Step-by-Step Above Ground Pool Disposal Process

Getting your yard cleared of an old pool involves a straightforward process designed to keep your project moving without delays or hidden surprises.

1. Initial Consultation. You contact our team with basic details about the pool size, construction type, and current physical condition. Sharing a few photos of the pool and the side gate path helps us evaluate access right away.

2. Site Evaluation. We review the yard layout, check gate clearances, identify fence line obstacles, and verify where the filtration equipment sits relative to your household power supply.

3. Water Drainage Verification. Before work begins, the pool basin must be drained of all standing water. You can drain it ahead of time following local rules, or we can discuss options for handling water removal prior to teardown day.

4. Structural Teardown. Our crew arrives with specialized cutting tools and safety gear. We dismantle the top caps, vertical posts, vinyl liner, and outer wall roll in a precise, controlled order.

5. Base and Site Clearing. After the frame is loaded, we address the sand base beneath the liner. We load out the sand, collect stray hardware, pick up plastic plumbing scraps, and remove the filter and pump assemblies.

6. Final Walkthrough. We sweep the work zone, check the gate access path for stray metal fasteners or liner remnants, and review the cleared space with you to ensure complete satisfaction.

Local Guidelines for Yard Clearing and Pool Disposal

Removing a pool involves more than just cutting up metal; it requires following local residential property standard rules. Above ground structures are regulated under local zoning codes due to barrier requirements, electrical connections, and water discharge rules. When you dismantle a pool, all secondary elements must be managed properly.

Discharging thousands of gallons of pool water onto neighboring properties or into public storm drains is restricted. Water must be properly dechlorinated before release onto your lawn, or directed to approved disposal points in accordance with municipal environmental guidelines. The electrical wiring feeding the pump motor must be safely disconnected from the breaker box, and any hardwired connections should be capped to meet residential safety standards.

You can review public resource information and statutory context on state land and property guidelines through the official Colorado Revised Statutes

resource page. When we complete a teardown, we separate materials so recyclable metals, electrical components, and heavy debris are handled according to regional waste stream rules, keeping your property fully compliant with local safety expectations.

Self-Haul Teardown vs Removal Services

Attempting a DIY pool teardown might seem like a practical way to save money, and for a small twelve-foot pool with no surrounding deck and a nearby utility trailer, it can work out fine. If you have metal shears, a sawzall, two strong friends, and a truck capable of hauling heavy loads, taking down a small unit over a weekend is doable.

However, self-haul attempts often hit severe snags on larger pools. The thin sheet metal wall of a steel pool is under significant tension. As you unbolt uprights, the metal can spring outward unexpectedly, presenting sharp edges that easily slice through standard work gloves. Handling hundreds of square feet of razor-thin rusted metal requires heavy leather protection, specialized cutting tools, and experience managing heavy structural tension.

The sand base poses an even bigger challenge for DIYers. A typical round pool holds three to five tons of packed sand under the liner. Shoveling that volume into a standard pickup truck will easily exceed the vehicle's payload capacity, requiring four or five trips to a commercial disposal facility. Factor in rental trailer fees, fuel cost, transfer site gate charges, and the physical toll of moving tons of wet earth by shovel, and hiring AMI Junk Hauling becomes the far more efficient choice.

Where Your Pool Materials Go After Disposal

An above ground pool is made of several distinct materials, each requiring a specific waste stream. We sort materials during demolition to maximize recycling and minimize landfill waste.

• Ferrous Scrap Metal. Steel wall panels, steel uprights, and metal bottom tracks are loaded separately and taken to metal recycling processors where they are melted down into raw manufacturing stock.
• Non-Ferrous Scrap Metal. Aluminum top rails, copper pump wiring, and brass valve fittings are sorted into non-ferrous recycling channels.
• Equipment and Plastics. Pool pump motors, sand filter tanks, and resin top caps are delivered to specialized commercial handling centers that process small appliances and rigid polymers.
• Vinyl and Hoses. The vinyl liner, solar covers, and flexible PVC hoses cannot be reprocessed through municipal recycling programs. These non-recyclable items are disposed of at regional solid waste landfills.
• Clean Fill and Sand. The sand base underneath the liner is clean fill. Depending on your preference, we can spread it across low spots in your yard or haul it to facility sites accepting clean earth for grading projects.

Recent Backyard Clearing Case in a Broomfield Neighborhood

A homeowner living in an established neighborhood contacted us regarding a twenty-four-foot round steel pool that had sat unused for three full seasons. Intense summer sun had turned the resin caps brittle, while severe winter ice cycles had buckled three vertical support posts along the north side. The pool wall leaned visibly, and the owner wanted to clear the yard to lay fresh sod before listing the home for sale.

Our crew arrived on site with a flatbed truck and specialized metal demolition tools. The property had a narrow six-foot side gate, which meant heavy equipment could not enter the backyard. We drained the remaining ten inches of stagnant rainwater using a portable submersible pump, routing the clean discharge safely into the yard turf according to local guidelines.

Once drained, two team members systematically unbolted the top rails, cut the vinyl liner into sections, and rolled the twenty-four-foot steel wall safely into five-foot rolls. After the frame was cleared, we excavated four tons of packed sand using wheelbarrows, navigating the narrow side yard path without damaging established lawn turf.

Who Uses Our Pool Teardown Services in Broomfield?

Homeowners call us when an older pool reaches the end of its useful life and becomes an eyesore. Property buyers and home sellers rely on our crew to clear damaged pools before real estate inspections or closing deadlines. Landlords contact us to eliminate liability risks on rental properties, while parents call us when grown children move away and the backyard pool sits unused season after season.

No matter why you need your backyard reclaimed, our crew takes care of every step from unrolling steel walls to hauling out tons of base sand. Send your job details through our online contact form, or call us directly at (888) 371-8120 to discuss your project and schedule your teardown estimate today.