Hot Tub Removal and Disposal

A hot tub that stopped working does not sit quietly. The cover soaks up rain until it weighs more than one person can lift, the shell fills with standing water and leaves, and the cabinet skirt around the base swells and separates. Meanwhile it is bolted to a deck or wedged into a side yard, and every quote to fix the heater costs more than the tub is worth.

AMI Junk Hauling gets it out of there. An empty spa still weighs several hundred pounds of shell, frame, and closed-cell foam, and it does not fold. Crews come to drain it, deal with the electrical disconnect, and either carry the shell out whole or cut it down where the only way out is a gate three feet wide.

Send photos of the tub, what is around it, and the path from there to the street. Or call and describe it: (888) 371-8120. The estimate is free and comes back in writing.

Why people call about a spa

• A failed heater or pump, where the repair quote passed what the tub is worth.
• A shell that has cracked, or plumbing that froze and split over a winter.
• A spa that came with the house and has never been filled by the current owner.
• A deck being rebuilt, where the tub has to be gone before the framing comes out.
• Rising power bills on a tub nobody uses but nobody unplugged.
• A home sale where the buyer asked for it to be removed before closing.

Getting it out of a fenced back yard

The removal itself is simple. Getting the shell from where it sits to where the truck is parked is the actual job. A spa that was craned in over a fence, or set on a patio before the fence went up, has no clear route out — and the frame is rigid, so a tub that measures seven feet across does not turn sideways through a thirty-six-inch gate.

There are two ways through that, and photos decide which. If a gate can come off its hinges or a fence panel can be lifted, the shell goes out whole on dollies. If nothing opens wide enough, it gets cut down on site into sections that fit the route, which takes longer and makes more debris to load but avoids taking apart your fence. Either way the acrylic, the foam, and the frame all leave — nothing is dragged onto the lawn and left there.

How it works

1. Send photos. The tub, the space around it, the gate or the narrowest point on the way out, and where a truck can park.
2. Get a number in writing. The figure covers size, where it sits, the route out, and whether it has to be cut down. Same-day quote in most cases.
3. Sort the power. A spa runs on a dedicated circuit, usually 240 volts, through a disconnect box near the pad. It has to be shut off and disconnected properly, and we will tell you whether that needs an electrician on your end.
4. Drain it. Several hundred gallons have to go somewhere sensible — not into a neighbor's yard or straight down a storm drain. Where the hose ends up is worth thinking about a day ahead.
5. It comes out and leaves. Whole or in sections, with the cover, the steps, and the debris. Metal goes to scrap and the pad is swept.

What we take

Portable spas and the hardware around them, working or not:

• Acrylic spas with foam-filled cabinets, two-person through eight-person
• Roto-molded and plastic-shell tubs
• Swim spas and oversized units that need cutting to clear a gate
• Wood-sided tubs and cedar soaking barrels
• Inflatable spas and their pump units
• Tubs sunk into a deck or surrounded by a wooden skirt
• Covers, cover lifters, steps, and handrails
• Pumps, heaters, blowers, and control packs
• The pad or platform underneath, when you want the spot clear

What we do not touch is the circuit itself beyond the disconnect. Anything that means opening a panel or re-terminating a feed belongs to a licensed electrician, and we will say so rather than doing it.

What moves the number

Four things settle a spa removal, and the tub itself is the smallest of them.

The route out. This is the main one. A tub on a patio with a straight run to an open driveway is the easy end. One in a fenced yard behind a gate narrower than the shell, up a flight of steps, or on a second-floor balcony, is a different job entirely — and whether it can leave whole or has to be cut apart is decided here.

Where it sits. A spa set on a concrete pad lifts straight onto dollies. One built into a deck with framing and skirting around it means taking that structure apart first, and sometimes cutting decking to open a path.

Size and construction. A two-person acrylic tub and an eight-person swim spa are not the same weight or the same crew. Foam-filled cabinets are dense, and a shell that has been holding rainwater weighs considerably more than the dry figure in the manual.

What else goes. The cover, the steps, and the equipment usually ride along at no real difference. Breaking out the concrete pad underneath is separate work with heavy debris, and it is worth deciding before the crew comes rather than while they are loading.

What you get on paper, and what to sort first

The estimate is written and comes before anything is scheduled. If the crew arrives and the gate turns out to be four inches narrower than it looked, so a whole-shell carry becomes a cut-down, you hear the revised number and decide before the saw comes out.

Two things belong on your side before the day. The electrical disconnect has to be off and, depending on how it was wired, formally disconnected — that is an electrician's call in some jurisdictions and a breaker in others, and we will tell you which this looks like. And the water: draining several hundred gallons onto a lawn saturates it, and dumping treated spa water into a storm drain is prohibited in many places. A garden hose into a sanitary cleanout, or a slow release across an area that can absorb it, both work. Decide which a day ahead, and AMI Junk Hauling will work around whichever you pick.

How to pick who removes it

Most crews handle spas cleanly. The bad version is specific and common enough to warn about: the tub gets cut apart in the yard, the shell pieces go on the truck, and the foam, the cut plumbing, and the metal frame stay behind under a tarp, along with a live disconnect box still on the wall.

Ask three things. Does the price include hauling everything, foam and frame included. Who is handling the electrical disconnect, and does that need a licensed electrician here. And where is the water going. A hauler with real answers to all three has done this before.

Hot tub removal near me: where crews run

Coverage is statewide rather than metro-only, which matters where a cut-down spa has to travel to a construction debris facility rather than a curbside pickup. Pick a state for how the work runs there — access, ground conditions, what local facilities take — and the towns covered in it.

Northeast

Connecticut · Maine · Massachusetts · New Hampshire · New Jersey · New York · Pennsylvania · Rhode Island · Vermont

Midwest

Illinois · Indiana · Iowa · Kansas · Michigan · Minnesota · Missouri · Nebraska · North Dakota · Ohio · South Dakota · Wisconsin

South Atlantic

Delaware · District of Columbia · Florida · Georgia · Maryland · North Carolina · South Carolina · Virginia · West Virginia

South Central

Alabama · Arkansas · Kentucky · Louisiana · Mississippi · Oklahoma · Tennessee · Texas

West

Arizona · California · Colorado · Idaho · Montana · Nevada · New Mexico · Oregon · Utah · Washington · Wyoming

Other things we haul

• Junk Removal
• Boat Disposal
• RV Removal
• Shed Demolition
• Deck Demolition
• Pool Removal

Get a number on your hot tub

Send photos of the tub, the gate, and the way out to the street, or call and describe it: (888) 371-8120. You get an upfront figure in writing and a straight answer on the power and the water before anything is scheduled. The form on this page works too.