Above Ground Pool Removal in Casper, WY

AMI Junk Hauling Truck
Above Ground Pool Dismantled! 🏊FREE ESTIMATE
AMI Removal Specialist with Crowbar
Liner, Walls & Decking Hauled Away 🌊(307) 207-5745
AMI Removal Specialist with Dolly
SCROLL DOWN TO CALL THE CREW

An unused above ground pool quickly turns from a backyard amenity into a massive headache. Many Casper homeowners put off dealing with an old pool because the sheer volume of metal, vinyl, and wet sand feels overwhelming. Disassembling a frame, hauling away hundreds of pounds of liner, and moving tons of base sand requires specialized tools, heavy trucks, and several days of hard labor that most people simply do not have time to tackle.

Leaving a disused pool sitting in the yard only invites worse problems over time. Wind can grab loose side panels, standing water breeds pests, and structural rust makes ultimate removal far more hazardous. AMI Junk Hauling handles complete pool teardown and site clearing across Casper, taking care of every step from unrolling the steel wall to hauling off the sand base so you can take your yard back.

Population
58,742
County
Natrona County
Nearest landmark
North Casper Park 0.4 mi
Climate zone
Lower Platte

Pool Teardowns for Every State of Decay

High elevation, severe freeze-thaw cycles, and relentless wind take a heavy toll on outdoor structures in eastern Wyoming. An above ground pool goes through distinct stages of failure in this climate, and we handle the teardown regardless of how far gone the structure is.

During the first season of non-use, small issues begin at the waterline. Sun exposure dries out the exposed vinyl liner, making it brittle and prone to micro-cracks. Water creeps behind the liner and sits against the steel wall. When winter arrives, trapped water freezes, expands, and pushes outward against the metal panels. Top rails crack, and plastic resin caps split open under intense frost stress.

By the third year, structural damage becomes obvious. Ice pressure causes the steel wall to buckle along the bottom track. Rust sets in where moisture meets the soil, weakening the base of the frame. Wind gusts common to the area bend unsupported rails once the water level drops. The liner peels away, exposing the damp sand pad beneath to severe erosion and frost heave, which tilts the remaining frame out of square.

By the tenth year, the pool is usually a collapsed hazard. Steel walls rust through entirely, leaving razor-sharp edges curled on the ground. The surrounding deck often sags as footings shift in the freezing ground. Piles of decayed vinyl, crushed filter pipes, and overgrown weeds turn the area into an eyesore.

We accept pools at every stage of decay. Whether you have an intact unit that simply needs draining and dismantle, or a rusted, wind-blown heap of metal and rotted liner half-buried in sand, our crew cuts down the metal, collects all debris, and clears the site completely.

Safe Dismantling and Navigating Backyard Hazards

The biggest challenge during a pool teardown is managing structural tension and tight backyard access. A drained pool wall behaves like a massive rolled steel spring held under tension. If you start unscrewing uprights without the right technique, the metal wall can abruptly uncoil or snap outward, causing severe cuts or striking nearby property. Our crew controls the unrolling process step by step to keep everyone safe.

Accessing the yard is where many DIY projects hit a wall. Narrow side gates, overhead utility lines, property fences, and soft soils make moving heavy materials difficult. Before pulling any metal apart, we inspect the route from the pool to our truck. We plan how to carry long top rails and wide sheets of rolled steel without scraping your home siding or damaging surrounding landscaping.

Once the water is drained according to local guidelines, we remove the top rails and uprights. Next, we slice the heavy vinyl liner into manageable sections, fold them to trap residual silt, and haul them out. The steel or resin wall is then systematically unfastened from its bottom track, rolled tightly, and bound for transport. Pumps, sand filters, PVC lines, and wooden steps are disconnected and loaded systematically to maximize truck space.

Factors That Influence Your Removal Quote

We do not publish fixed price lists because every backyard setup in Casper is unique. The size of the pool and the materials used in its construction are the initial factors that determine the overall scope of the job. A standard twelve-foot round pool with an aluminum frame requires far less labor and truck space than a thirty-foot oval pool with thick steel walls and heavy resin bracing.

The ground conditions and physical access route also affect the quote. If our crew can park close to the gate and use a wide, flat path, loading moves quickly. If we must navigate steep slopes, tight gate openings, decorative stone, or long distances to the street, manual labor increases significantly. Seasonal factors matter as well, as working around deep snow or frozen ground requires extra time and specialized effort.

Finally, what you choose to do with the sand base plays a major role in the overall project scope. A typical pool sits on tons of sand. Hauling that heavy material away adds significant weight to the load, which increases disposal costs. If you choose to have us spread the sand on site or leave it for future fill, the job requires less hauling time and heavy transport.

How to Get Your Pool Teardown Started

Getting your yard cleared is a straightforward process when you work with our team. Follow these steps to schedule your project:

1. Assess the area. Note the pool dimensions, wall height, and construction material if known. Check whether water is still in the pool and evaluate the side yard gate clearance for our crew and wheelbarrows.

2. Contact our office. Send details through our online form or call us directly. Provide photos of the pool, the surrounding deck if one exists, and the path from the gate to your driveway.

3. Review your quote. We evaluate the photos and details to give you a clear, itemized quote covering all labor, dismantle work, loading, and disposal fees with no hidden surprises.

4. Prepare the space. Ensure the path to the pool is free of pet waste, patio furniture, and lawn equipment. If possible, clear a spot in the driveway where our truck can park safely on job day.

5. Watch the yard clear out. Our crew arrives on schedule, completes the teardown, loads the metal, liner, and equipment, cleans up loose debris, and leaves your yard ready for your next outdoor project.

Permits and Local Pool Disposal Rules

Removing an above ground pool involves managing high-volume waste streams, including scrap metals, heavy plastics, and residual water. Unlike motor vehicles or tiled structures, an above ground pool has no vehicle title or state registration requirements in Wyoming. However, property owners must still follow municipal rules regarding structure removal and water runoff.

Discharging thousands of gallons of chlorinated or salt water directly into street gutters or adjacent properties is restricted in most communities to protect municipal storm sewer systems and water tables. Before dismantling begins, water must be dechlorinated or properly routed according to municipal guidelines. If you are unsure about local discharge regulations, consult the regional water utility or local building office before draining.

Because above ground pools are often subject to safety barrier codes, removing one may affect your property liability status or local fence requirements. For official guidance on municipal codes, structure teardowns, and general property regulations, you can review the public statutes published through the

Wyoming Legislature

state resource portal. Our crew works efficiently to separate recyclable metals from landfill-bound liners, ensuring all debris is handled responsibly according to regional solid waste guidelines.

Diy Teardown Versus Hiring Our Crew

Taking down a pool yourself might seem like a good way to save money, and if you own a heavy-duty pickup, power tools, metal shears, and have three or four strong friends available for a full weekend, self-hauling is certainly an option. If the pool is small, dry, and already partially taken apart, a DIY effort can work out well.

However, self-haul projects often run into immediate roadblocks. A pool wall cannot simply be tossed into the back of a standard pickup. Unrolled steel sheets spill over truck beds, catch the wind, and pose serious hazards on the highway unless cut into small sections with reciprocating saws or metal snips. The vinyl liner is another hurdle; once saturated with wet sand and mud, a full liner can weigh hundreds of pounds and will easily tear through standard trash bags.

The physical toll is also substantial. Shoveling three to five tons of wet base sand out of a backyard with wheelbarrows requires immense physical effort and multiple trips to a transfer station or landfill, where gate fees are charged by total weight. Hiring AMI Junk Hauling saves you days of backbreaking labor, eliminates trailer rental costs, and removes the risk of sharp metal injuries or property damage.

A Typical Backyard Teardown Project

Late fall is a common time for property owners to address failing backyard pools before winter storms roll across the plains. A typical job involves a twenty-four-foot round pool with an rusted steel frame that collapsed after a heavy early-season snowstorm. The water had drained out through a torn liner, leaving three feet of sludgy leaf debris and saturated sand at the bottom.

The homeowner needed the structure removed before selling the home in the spring. Access was limited to a three-foot side gate running beside a detached garage. The crew arrived with specialized metal-cutting tools, heavy-duty tarps, and high-capacity wheelbarrows.

First, the crew cut the damaged liner into six manageable pieces, wrapping them to prevent mud from dripping across the flagstone patio. Next, they unfastened the top rails and cut the corroded wall into flat four-foot sections, stacking them safely inside the truck. Finally, the team removed the pump and filter assembly, then spent two hours excavating and hauling four tons of compacted base sand out through the narrow side yard. The entire site was raked flat, leaving a clean, level dirt patch ready for topsoil and seed, all completed in a single afternoon.

Is It Time to Clear That Old Pool Out of Your Yard?

Homeowners who want to restore their lawn, buyers preparing a home for market, and landlords removing backyard hazards rely on us for complete pool teardowns. If you have an unwanted pool taking up valuable space, our crew handles the heavy lifting, precise dismantling, and total debris clearing from start to finish.

Send details through the form on this page, or call and describe it: (307) 207-5745. You get a figure back in writing, clear scheduling, and prompt service across Casper to make your backyard look clean and open again.

Above Ground Pool Removal in Casper: questions

Do I need to drain the pool water before your crew arrives?
Yes, the pool must be completely drained before we can begin dismantling the wall or cutting the liner. A pool holding water cannot be safely taken down, as the outward water pressure keeps the frame under load and creates an extreme hazard if cut. Check local municipal guidelines regarding where pool water can be safely discharged on your property or into the sewer system.
What happens to the heavy sand pad under the pool liner?
We offer flexible options for the sand base depending on your plans for the yard. We can completely shovel and haul the sand away, spread it evenly across the immediate area to level low spots, or leave it banked in place for a future garden bed or patio project. Hauling sand away increases the job weight, which is reflected in your quote.
Can you tear down a surrounding wooden or composite deck?
Yes, we frequently remove custom decks, wooden steps, and elevated platforms attached to above ground pools. Removing a deck requires additional demolition labor, tool work, and truck space for lumber, so please let us know if a deck is present when you request your estimate so we can price the project accurately.
What will my backyard look like once the pool is completely gone?
Once the pool, frame, liner, and sand are cleared, you will be left with a flat circle of bare dirt or compacted soil where grass could not grow. Because the weight of the water compacts the ground beneath it, the area may sit slightly lower than the surrounding lawn. Most homeowners add topsoil and grass seed or place a new patio feature over the footprint.
Do you take the filter system, pump, and PVC pipe as well?
Yes, we take all peripheral pool equipment. This includes the electric pump motor, sand or cartridge filter tank, plastic skimmers, PVC or flexible hoses, metal ladders, and chemical feeders. We disconnect these components safely and ensure recyclable metals are sorted during disposal.
Is an in-ground pool removal covered under this same service?
No, in-ground pool removal is a completely different process that involves heavy excavation machinery, concrete breaking, structural backfilling, soil compaction, and complex municipal permits. Our service is strictly for above ground pools, framed splash pools, and soft-sided temporary pools.

Get a quote in Casper

Tell us what you have and where it sits. We handle the loading.

No obligation. We come to you and quote on the spot.

Nearby towns we serve

  • Evansville, WY2.3 mi
  • Mills, WY3.2 mi
  • Bar Nunn, WY3.6 mi
  • Glenrock, WY22.3 mi
  • Douglas, WY47.8 mi
  • Rawlins, WY88.1 mi
  • Wheatland, WY89.2 mi
  • Buffalo, WY104.2 mi

Other services in Casper

Explore