Above Ground Pool Removal in Englewood, CO

An unused above ground pool on an Englewood property rapidly turns from a backyard amenity into a massive structural liability. Once the water is drained or leaks out, the thin metal shell loses its structural tension, leaving unstable steel walls and faded vinyl liners exposed to wind and yard debris.

Our team handles complete teardown and haulaway for these neglected structures. We cut down rusted steel walls, pull up torn liners, dismantle surrounding decks, and clear out the heavy sand bases that hold water against your lawn.

Whether you need an old pool removed before selling a home or want to reclaim your yard space, AMI Junk Hauling handles every phase of the project quickly and safely without damaging your surrounding land.

Pool Conditions We Tear Down Across Englewood

The local climate along the South Platte basin brings severe structural stress to outdoor backyard installations. High elevation sun delivers intense ultraviolet radiation that bakes vinyl liners until they turn brittle and crack along the waterline. Once a liner splits, water seeps into the sand pad below, accelerating base erosion and causing uneven settling across the frame.

Winter freeze-thaw cycles create even worse conditions for steel-walled structures. When trapped water freezes, the ice expansion pushes outward against cold-weakened metal panels, causing the wall to buckle out of its bottom support track. Spring snowmelt then sits inside the sand base, creating persistent dampness that rusts out steel uprights from the ground level up. By fall, a pool that was slightly tilted becomes completely unsalvageable.

We take down above ground pools in any state of decay across Englewood neighborhoods:

• Buckled steel or resin walls that have popped out of their bottom tracks
• Brittle, dry-rotted, or split vinyl liners filled with stagnant rain runoff
• Corroded support uprights, rusted top rails, and seized hardware
• Swollen, rotten wooden decks and rickety safety ladders
• Abandoned pump housings, cracked PVC lines, and sand filter tanks
• Compacted sand pads, foam coves, and underlying paver bases

It does not matter if your pool is partially torn down, full of mud, or buried under fallen tree branches. We bring the right cutting tools and heavy trucks to clear the entire assembly down to the dirt layer.

Navigating Side Yards and Dismantling Pool Frame Dimensions

A typical round or oval pool spans anywhere from fifteen to thirty feet across, creating a massive footprint that must be carefully processed into transportable pieces. The physical structure cannot simply be pushed over or dragged through a side gate whole. It requires systematic disassembly from the top down to ensure safety and prevent property damage.

The work begins by removing the top cap covers, top rails, and vertical upright posts. Once the frame framing is unbolted, the rolled steel wall remains under substantial spring tension. Cutting or unrolling a rolled steel pool wall without proper control can cause the sharp sheet metal to snap outward violently. Our crew secures the wall before cutting it into manageable four-foot sheets using heavy-duty shears and saws.

Narrow side gates and close property lines in established Englewood residential areas add physical access hurdles. We haul cut steel panels, rolled vinyl, and chopped deck timber out using heavy-duty hand carts to protect lawn turf. The sand base beneath the liner often weighs several tons; we wheelbarrow this material out manually when gate access prevents small machine loaders from entering the yard safely.

Factors That Influence Your Pool Removal Quote

We do not issue standard flat rates over the phone because physical property conditions vary wildly from one yard to the next. The overall footprint diameter and wall height set the baseline volume of scrap metal and vinyl waste that must be hauled away. A fifteen-foot round pool requires far less labor than a broad oval structure supported by heavy external side buttresses.

Access distance from the pool pad to our staging truck plays a major role in labor time. Tight side yards, steep yard grades, or long carries around garages require additional crew members to move heavy materials safely. Gate width dictates whether we move the sand pad out with wheelbarrows or compact equipment.

The scope of connected structures also drives job sizing. Removing a small metal ladder is simple, but dismantling a custom wrap-around elevated wooden deck adds significant lumber volume and footing work.

How to Schedule Your Pool Teardown Project

1. Initial assessment. Take a few photos of your pool, the surrounding deck, and the walk route from the backyard to the driveway or street.

2. Request a quote. Submit your photos and details through our site or call our team to discuss the site conditions and job scope.

3. Plan water discharge. Ensure all remaining water is fully drained from the pool according to local municipal drainage rules well before our crew arrives.

4. Worksite prep. Clear back lawn furniture, unlock gate entry points, and keep pets indoors so the crew has a clear path to the pool area.

5. Onsite teardown. Our crew dismantles the frame, cuts the wall sheet metal, rolls the liner, and removes the sand base based on your specifications.

6. Final cleanup. We sweep up loose metal screws, rake out the remaining soil area, and haul all materials away in our trucks.

Local Regulatory Guidelines and Pool Disassembly Standards

Removing an above ground pool involves clear distinction from in-ground demolition jobs. In-ground pool removals require extensive earth excavation, engineered soil compaction, and formal municipal building permits. Above ground teardowns are straightforward structural removals that focus on safe material handling, proper water disposal, and clean recycling streams.

Before cutting into a pool frame, property owners must responsibly handle any standing pool water. Draining thousands of gallons of chlorinated water directly into storm drains or onto neighboring properties can violate water quality regulations. Water must be dechlorinated and directed safely onto porous lawn areas or discharged through approved sanitary drainage connections based on guidelines established by the Colorado General Assembly and municipal utilities.

Additionally, many local property codes mandate safety barriers and locking gates around residential pools. Once the pool is removed, ensure any dedicated pool fencing or electrical hookups are brought up to standard or properly decommissioned by a certified to maintain site compliance.

Diy Pool Teardown vs Hiring AMI Junk Hauling

Tackling an above ground pool teardown as a weekend DIY project seems simple until the first rusty bolts refuse to turn. If you possess a heavy-duty reciprocating saw, metal shears, strong gloves, a pickup truck, and several helpers, taking apart a small aluminum-framed pool is possible. However, most homeowners quickly discover the true difficulty when handling the raw sheet metal and massive waste weight.

A rolled steel pool wall becomes extremely hazardous once stripped of its top rails. The thin metal sheet remains under tension and features razor-sharp edges that can easily inflict severe cuts if it snaps open unexpectedly. Furthermore, a single vinyl liner soaked in mud can weigh hundreds of pounds, making it nearly impossible to lift into a standard personal truck bed without proper equipment.

Disposal creates another major hurdle. Local recycling drop-offs require ferrous steel, non-ferrous aluminum, and contaminated plastic waste to be strictly separated before arrival. Landfills charge heavy tipping fees for wet sand and bulky debris. Hiring saves you multiple grueling trips to transfer stations, eliminates injury risk, and ensures the job gets finished in a single afternoon.

Material Separation and Responsible Disposal Streams

We break down your old pool into distinct material streams to divert as much bulk waste from landfills as possible:

• Ferrous steel: Steel wall panels, bottom tracks, and steel support posts are hauled directly to scrap metal processors for melting and reuse.
• Non-ferrous aluminum: Top caps, specialized aluminum rails, and alloy ladders are sorted and sent to dedicated non-ferrous metal facilities.
• Pumps and electric motors: Filter motors, brass fittings, and copper wiring are separated for specialized metal recovery.
• Vinyl and PVC: Heavily degraded vinyl liners, pool covers, and rigid PVC plumbing pipes go to municipal solid waste sites as non-recyclable material.
• Sand pad material: Clean sand base material can be redistributed on site to level backyard depressions or transported to clean fill receiving sites.

Englewood Property Owner Tackles Inherited Pool Removal

A homeowner near South Logan Street recently purchased an older ranch home featuring a twenty-four-foot round above ground pool in the backyard. The previous owner had left the pool sitting empty for two years following a severe hail storm that shredded the top rails. The steel walls had buckled inward, collecting rain, dead leaves, and heavy debris at the bottom.

The new owner needed the rusted eye-sore removed immediately to obtain homeowner insurance coverage and clear space for a lawn expansion. However, access was extremely tight, with only a three-foot side gate separating the house from the fence line, ruling out any heavy mechanical loader access.

Our two-person crew arrived with specialized metal cutting shears and heavy-duty hand carts. We cut the steel wall into manageable sections, wrapped the torn liner to contain the trapped sludge, and carted all metal frame components out through the narrow gate.

Is It Time to Reclaim Your Englewood Backyard Space?

Homeowners getting ready to place their property on the market, buyers who just purchased a home with an unwanted pool, and families tired of maintaining an unused backyard hazard turn to us for fast removal. Landlords also call on us to eliminate liability risks on rental properties across the area.

To receive a clear written estimate for your teardown job, send photos of your pool and gate entry route through our online contact form, or call us directly at (888) 371-8120 to schedule your crew today.