Above Ground Pool Removal in Irving, TX
That old above ground pool sitting in your yard is no longer serving its purpose. What was once a summer retreat has turned into an eyesore with split vinyl, rusty steel panels, and stagnant water that attracts mosquitoes. Leaving it sitting in place only takes up valuable lawn space while creating a safety hazard for family and neighbors.
AMI Junk Hauling provides full above ground pool teardown and clearing across Irving. Our crew steps in to handle the heavy manual work, systematically dismantling the metal structure, clearing out the sand base beneath, and hauling every piece away so you can reclaim your yard.
- Population
- 254,392
- County
- Dallas County
- Nearest landmark
- Lively Park
- Climate zone
- North Central
Pool teardown for every stage of damage in North Texas
The climate in North Texas takes a heavy toll on outdoor recreational structures. Intense summer heat combined with high ultraviolet exposure bakes the vinyl liner until it loses all flexibility. Once the liner cracks, water slowly seeps into the sand bed below and stays trapped against the lower tracks of the pool frame. Heavy summer storms and severe weather bring wind stress and rapid water volume changes, while winter freeze cycles expand trapped moisture against the frame.
In the first season or two of neglect, minor issues start to surface. The top rails chalk, fade, and turn brittle under constant sun exposure. The water line drops from undetected slow leaks, and algae turns the remaining water dark. At this stage, the pool is mostly intact, but the filtration equipment has usually seized or rusted out from sitting idle.
By the third year, structural failures compound rapidly. The lower steel track corrodes completely under the wet sand base. Without structural support, the outer steel sheet pinches and buckles inward along the bottom edge. Resin top caps snap off, leaving jagged edges exposed. Standing rainwater accumulates, creating an uncontrolled breeding ground for insects and adding thousands of pounds of static load to a weak frame.
After a decade, the structure collapses entirely. The steel wall rusts through, allowing the remaining sand and liner fragments to spill into the yard. We take pools at every stage of decay. Whether you have an intact unit that simply needs to go or a collapsed wall sitting in a pile of wet sand and rotting vinyl, we clear the entire footprint down to the soil.
Navigating side yards and managing heavy tear-outs
Getting a pool off your property begins at the side gate. We assess the path from your back yard to the driveway before touching a single bolt. Standard residential gates in older suburban neighborhoods can be narrow, often bordered by air conditioning units, gas meters, or low overhangs. Our crew plans the haul route to move material safely without scraping your home's siding or tearing up your turf.
Dismantling a pool requires a strict sequence to prevent dangerous structural collapses. A drained pool wall remains under high spring tension. If you unbolt the seam incorrectly, the rolled steel panel can snap open abruptly with razor-sharp edges. We safely unbolt top rails, remove vertical uprights, and unroll the thin steel wall in a controlled manner, cutting it down into manageable sections right on site.
The vinyl liner is sliced into smaller sections, drained of residual mud, and packed into heavy-duty hauling bags. The filtration system, PVC pipe runs, and metal ladders are disconnected and prepped for transport. Then comes the heaviest phase: the sand base. The multi-ton layer of packed sand underneath the liner must be shoveled out by hand or moved with compact equipment. We wheelbarrow the material to our truck, clearing the pad so you are left with a flat surface ready for seed or sod.
Understanding the variables behind pool disposal quotes
Summer heat and seasonal weather play a direct role in how pool teardown work is planned. Working in peak sun during hot Texas months requires extra safety precautions for heavy manual labor like shoveling wet sand. We do not publish generic price tables online because every backyard setup presents different physical demands and disposal weights.
The overall footprint of the structure is the primary quote factor. A standard round pool takes less labor than a large oval model supported by heavy side buttresses and extensive cross-framing. The wall height also dictates the total volume of metal and vinyl liner that must be loaded onto our trucks.
Access distance drives labor costs significantly. If our crew can park near a wide double gate, loading goes quickly. If we must navigate a long, narrow side yard, carry material around tight corners, or work on a steep slope, manual transit time increases. The presence of a surrounding wooden deck adds another layer of teardown labor and waste volume. Finally, the choice to haul away the heavy sand base versus spreading it across your lawn changes the total disposal weight of the job.
Five straightforward steps to clear your back yard
1. Request your evaluation. Reach out to us through our online form or over the phone. Tell us the size of your pool, its current condition, and whether it still holds water or has a surrounding deck.
2. Send photos of the site. Snap a few quick pictures of the pool, the base area, and the side path leading from the back yard to the driveway. Clear photos help us identify access points, gate widths, and potential obstacles like overhanging branches.
3. Review your upfront estimate. We review your details and send a clear written quote covering all teardown labor, heavy loading, and material disposal. You will know the entire process before work begins.
4. Schedule the teardown. Pick a date that fits your calendar. Ensure the pool is fully drained prior to our arrival if local discharge guidelines allow, or coordinate with us on how the remaining water will be handled.
5. Enjoy your reclaimed yard. Our team arrives on time, dismantles the pool, hauls away the metal, liner, and sand, and sweeps the work space clean so you can start planning your new outdoor space.
Local requirements and utility coordination
Removing an above ground structure involves local environmental guidelines regarding water disposal and property modifications. Before draining thousands of gallons of treated water, property owners should check guidelines set by local municipal water authorities. Discharging heavily chlorinated pool water directly into storm drains can violate local environmental codes. In most areas, water must be dechlorinated or directed into specific drainage cleanouts on your property.
Because above ground pools are often regulated as elevated water structures, local building departments may require notification when a pool and its safety perimeter are removed. If your pool was tied into hardwired electrical connections for the pump, filter, or heater, those electrical feeds must be safely disconnected and capped at the source prior to demolition.
For official information regarding property rules, environmental standards, and municipal codes, visit the state legal portal. Checking these requirements early ensures your site project moves forward smoothly without unexpected municipal delays.
Sorting and processing teardown materials
An above ground pool is made of distinct material streams that must be handled separately once loaded onto our trucks. We sort every component so that recyclable metals stay out of local landfills whenever possible.
The structural framework yields high volumes of scrap. Steel wall panels, base tracks, and steel uprights are transported to local scrap processors for recycling. Aluminum top rails and resin-coated metal framing are separated into non-ferrous metal recycling streams. The electrical pump motor, brass valves, and copper wiring from heating units are also salvaged for metal recovery after being disconnected from PVC lines.
Non-recyclable components go to designated solid waste transfer sites. The degraded vinyl liner, heavy PVC hoses, plastic skimmer baskets, and resin rail covers cannot be processed by standard recycling facilities and must go to municipal waste streams. The sand base represents a separate clean fill fraction. Clean sand can often be reused on site to level out lawn depressions, or hauled away to facilities that accept clean fill for construction grading projects.
Clearing an abandoned pool in an established neighborhood
A homeowner in an established neighborhood needed to remove an old 24-foot round pool that had sat unused behind their house for over four years. High summer heat had completely destroyed the vinyl liner, leaving two feet of muddy water trapped in the bottom, while the lower steel wall had rusted out along the rear track.
Access to the back yard was limited. The side path was narrow, squeezed between the garage and a wooden privacy fence, with a standard three-foot gate as the only entry point. Using heavy machinery was impossible without taking down fence panels, so the entire tear-out had to be completed using manual tools and wheelbarrows.
Our crew pumped out the remaining stagnant water using a small submersible unit directed into the home cleanout. We safely unbolted the top rails, cut the steel wall into manageable sections, and carried out the metal and ruined liner piece by piece. Finally, we shoveled out three tons of wet sand base, wheeled it down the narrow side path, and loaded it into our haul truck. The entire project was finished in six hours, leaving the homeowner with a clean, level dirt pad ready for fresh sod.
Who relies on our pool removal services?
Homeowners getting ready to sell their property turn to us to eliminate old back yard hazards that bother home buyers or home inspectors. New buyers who inherited a neglected pool often want the yard space back for gardens, patios, or open lawn. Landlords count on us to remove safety liabilities from rental properties, and families whose kids have grown out of using the pool call us to reclaim their back yard space.
If you have an old pool taking up space, get in touch with today. Send details through the form on this page, or call and describe your site setup directly: (210) 794-6832. You will get a straightforward figure in writing, clear scheduling options, and a dedicated team ready to clear your yard completely.
Above Ground Pool Removal in Irving: questions
Do I need to drain the pool before your crew arrives?
Do you haul away the sand base underneath the pool?
What will my yard look like once the pool is gone?
Can you tear down a surrounding wooden deck at the same time?
Does AMI Junk Hauling handle in-ground pool demolition?
Do you take the pool pump, filter, and heater?
Nearby towns we serve
- Cockrell Hill, TX
- Euless, TX
- Farmers Branch, TX
- University Park, TX
- Highland Park, TX
- Grand Prairie, TX
- Coppell, TX
- Dallas, TX


