Above Ground Pool Removal in Kendale Lakes, FL

AMI Junk Hauling Truck
Above Ground Pool Dismantled! 🏊FREE ESTIMATE
AMI Removal Specialist with Crowbar
Liner, Walls & Decking Hauled Away 🌊(786) 964-4049
AMI Removal Specialist with Dolly
SCROLL DOWN TO CALL THE CREW

An above ground pool in Kendale Lakes starts as a back yard feature, but years of high heat, intense sunshine, and damp soil wear down every component. Sun bakes the vinyl liner until it snaps, while moisture rots the bottom track under the sand base. What was once a summer retreat becomes an unsightly steel shell holding stagnant water and breeding mosquitoes.

Leaving a worn-out pool in place creates safety risks and risks neighborhood complaints. Draining the water leaves unsupported sheet metal under tension, which can collapse during severe wind storms. Homeowners often find that tearing down the steel walls and hauling tons of wet sand takes far more time and heavy equipment than expected.

AMI Junk Hauling handles complete pool teardown across the area. Our team cuts down the structure, clears out the sand pad, packs up the pump equipment, and hauls every piece off your property in one visit.

Population
52,661
County
Miami-Dade County
Nearest landmark
McMillian Park 0.2 mi
Climate zone
Everglades

Pool Demolition for Damaged and Abandoned Yards in Kendale Lakes

South Florida weather tears down outdoor structures through distinct stages of wear. Understanding how your pool degrades helps determine when complete pool teardown becomes necessary.

During the first few seasons, intense ultraviolet rays beat down on top rails and plastic caps. Vinyl liners lose their flex, drying out along the waterline. Minor leaks drop water behind the liner, soaking into the sand base and starting unseen rust on the lower wall track inside the bottom rim.

By the third year of neglect or heavy use, sub-tropical moisture speeds up hidden damage. Standing water combined with humid air corrodes steel uprights from the bottom up. High summer rain fills unmaintained pools, causing walls to bow outward. Florida storms push wind against weakened panels, bending the top rims out of alignment and causing structural failure.

By year ten, the metal framework degrades past repair. Structural rust eats through the steel walls, leaving jagged edges along the base. The sand pad below becomes a muddy, packed layer filled with organic debris and weeds. Resin joints crack, while PVC pipes break under sun exposure.

We remove above ground pools in any stage of decay across Kendale Lakes. Our crew accepts complete pools, collapsed walls, split liners, rusted frames, abandoned filter systems, decks attached to pool rims, and thick sand bases. We clear out old steel pools, resin-frame models, aluminum structures, and soft-sided oval setups. Whether your pool sits filled with old rainwater or has already buckled onto the grass, we take apart the metal, pull the vinyl, and clear out the yard.

Navigating Side Yards and Dismantling Pool Walls Safely

Getting heavy pool parts out of a Kendale Lakes back yard requires careful planning around tight property lines. Many homes feature narrow side gates, utility meters, air conditioning units, or decorative fencing that limits equipment space. We check gate openings and path clearances before bringing in hauling carts, ensuring your fence posts and stucco walls remain untouched throughout the work.

Dismantling a pool is a step-by-step process because a drained metal pool acts like a sheet of metal under spring tension. We never simply knock down or push over a standing structure. First, our crew disconnects power lines to the pump, drains any remaining water into approved drain points, and cuts away PVC plumbing lines.

Next, we unscrew top rails and pull off vertical upright caps. The vinyl liner is sliced into manageable sections, rolled tight, and carried to the truck to keep water and mud off your lawn. The rolled steel wall is unbolted at the seam and unrolled carefully along its bottom track, controlled by two workers to prevent sharp edges from popping outward.

Once the frame is down, we load steel panels, top tracks, aluminum components, and heavy pump motors. Finally, we address the sand base beneath the pool. Tons of wet sand are scooped, loaded into heavy wheelbarrows, and wheeled out to our haul vehicles, leaving your yard clear and level.

Factors That Determine Your Pool Teardown Quote

We do not publish fixed rate tables because every yard layout and pool structure in Kendale Lakes presents unique labor requirements. The size of your pool frame is the main factor. A small round pool takes significantly less time and hauling capacity than a large oval setup supported by heavy side buttresses.

Access distance from the pool site to our truck also drives the work involved. If our team can back directly up to a wide side gate, loading proceeds quickly. If we must wheel heavy steel panels, wet vinyl, and tons of sand through a long side yard, down steps, or around tight garden structures, the extra manual labor affects the estimate.

Sand handling options change the final price as well. Leaving the sand base on site for backfill or garden grading keeps costs down. Choosing complete removal requires digging, wheeling, and hauling heavy weight, which increases labor time and disposal fees. Surrounding wooden decks or attached steps also add to the scope of work.

We evaluate all these physical variables upfront. When you send details and photos of your setup, AMI Junk Hauling provides a clear quote covering all teardown labor, loading, and disposal upfront.

Step-by-Step Pool Removal Process

1. Send photos of the site. Take pictures of the pool, the pump setup, attached decks, and the side gate path leading from the yard to the street. Note whether the pool still holds standing water.

2. Receive a clear quote. We review your photos and pool dimensions, assess access challenges, and send back a written estimate detailing labor, teardown, and hauling costs with no hidden fees.

3. Prepare the access route. Clear toys, lawn furniture, and potted plants from the path between your pool and the driveway. Unlock side gates and ensure pets are secured indoors on your scheduled date.

4. Structure teardown begins. Our crew arrives on site, cuts down the liner, unbolts the steel frame, removes uprights, and separates all metal hardware safely without damaging your turf or surrounding property.

5. Clearing the sand base. We scoop, load, and transport the compacted sand layer under the liner according to your agreement, taking away heavy material and leveling out the work area.

6. Final sweep and haul away. The team sweeps up loose metal screws, cuts away stray PVC fragments, loads all debris into our vehicle, and leaves your yard clear for future landscaping.

Local Disposal Guidelines and Property Requirements

Removing an above ground pool in Kendale Lakes involves following local regulations regarding water discharge and solid waste handling. Above ground pools do not carry real estate titles like motor vehicles or RVs, but disposing of their materials must meet regional environmental rules.

Water disposal is regulated to protect local groundwater and storm drain networks. Chlorinated or chemically treated pool water cannot be dumped directly into public street gutters or storm drains. Water must sit until chlorine levels drop or be directed toward grass areas capable of absorbing the volume without causing runoff onto adjacent lots.

Unattended pools filled with stagnant water violate local code standards for vector control, as standing water creates breeding zones for mosquitoes. Property owners face notices if abandoned pools pose health hazards or safety risks to neighbors.

For official information on property standards, abandoned structures, or code enforcement procedures, consult the local government resources through the county treasury portal. Our team follows responsible clearing methods, taking metal to scrap recycling facilities and sorting vinyl materials for proper landfill disposal.

Evaluating DIY Pool Removal Against Teardown

Tackling pool teardown yourself can work if you have a small pool, personal truck, heavy tools, and spare weekends. If the pool is small, dry, and you have helpers to lift heavy metal frames, self-hauling saves upfront money.

However, DIY attempts often run into major hurdles during the tear-down process. Removing a steel wall requires power shears, socket sets, and heavy gloves. Unbolting rusty steel panels often leads to sharp, spring-loaded metal recoiling out of control, creating serious cut hazards. A single steel pool wall can weigh hundreds of pounds and will not fit into a standard pickup bed without being cut down into small sections.

Disposing of the liner and sand base creates additional problems. Local trash pickup will not take large rolls of thick vinyl or tons of wet sand left at the curb. Hauling sand requires multiple trips to disposal sites that accept clean fill, adding fuel costs and rental equipment fees. Renting a trailer, buying metal blades, paying dump fees, and risking back strain often offsets any initial savings. Hiring our crew provides speed, safety, and complete hauling in a single morning.

Material Sorting and Responsible Waste Streams

An above ground pool is made of several distinct materials, each requiring a specific disposal method once dismantled. We sort every component on site to minimize what goes to local landfills.

Ferrous metal components, including the main steel wall sheet, bottom tracks, and structural posts, are separated for local metal recycling streams. Aluminum top rails, cap brackets, and pump motor housings go to non-ferrous scrap buyers, turning worn pool hardware into reusable raw metal.

Vinyl liners, resin top caps, skimmer baskets, and rigid PVC plumbing pipes cannot be recycled through standard consumer streams. These items are cut down, bound, and transported to licensed regional waste facilities for proper disposal.

The sand base requires separate handling. Clean sand can be spread across your lawn to fill low spots, used as landscaping material, or hauled to receiving sites accepting fill dirt and sand. Filters containing sand or diatomaceous earth are emptied and cleaned before components are split into plastic waste and recyclable metal parts.

Who Uses Our Pool Teardown Service in Kendale Lakes?

Homeowners call us when an old pool liner splits and replacing it costs more than the pool is worth. Real estate agents contact us when selling a home where an unsafe, rusty pool deters buyers or fails insurance inspections. New buyers who inherit unwanted pools use our service to reclaim back yard space for grass, patios, or dog runs. Landlords rely on our team to remove liability risks from rental properties quickly.

If you have an old pool taking up space, turning into a mosquito hazard, or rusting away behind your house, we provide complete teardown and hauling solutions. Contact to clear your yard. Send details through the form on this page, or call and describe it: (786) 964-4049 to get your free written quote today.

Above Ground Pool Removal in Kendale Lakes: questions

Do I need to drain the pool water before your crew arrives?
Yes, draining the pool ahead of time is recommended. Water must be discharged slowly onto your lawn or into an approved drain point following local rules. If your pool still holds water on scheduled teardown day, let us know beforehand so we can bring submersible pumps to handle it before cutting walls.
Do you take away the heavy sand base under the liner?
We offer both options depending on your plans for the yard. We can dig up and haul away the entire sand base, leaving clean ground ready for sod, or we can spread the sand across the footprint to level out low spots in your lawn.
What will my yard look like after the pool is removed?
Removing the pool leaves a round or oval patch of soil where grass was covered. The ground will be flat, compacted, and free of metal, plastic, or liner debris. You will have a clean, level dirt space ready for new grass seed, sod, or garden landscaping.
Can you tear down a wooden deck built around the pool?
Yes, we frequently dismantle attached or surrounding wooden and composite decks during pool teardown jobs. We pull up deck boards, cut support posts below grade, extract footings, and haul away all lumber alongside the pool materials.
Is this service for in-ground pool removal as well?
No, this service is strictly for above ground pool removal. In-ground pool removal requires heavy excavation machinery, concrete breaking, engineered backfill, and municipal building permits. We specialize in taking down above ground metal, resin, and vinyl structures.
How does high heat and humidity affect pool walls in Kendale Lakes?
Intense sunshine bakes top rails until they crack, while constant humidity holds moisture against the bottom metal tracks buried in sand. This causes unseen bottom-track rust, weakening structural integrity and causing walls to buckle during heavy winds or storms.
What happens to the pool pump, filter, and heater?
We disconnect, load, and haul away the entire filtration system. Pump motors and metal heaters are routed to scrap metal recycling, while plastic filter tanks and hoses are disposed of at licensed waste facilities.

Get a quote in Kendale Lakes

Tell us what you have and where it sits. We handle the loading.

No obligation. We come to you and quote on the spot.