Above Ground Pool Removal in New Iberia, LA

An above ground pool in New Iberia that sits half-drained or warped creates an immediate problem in the yard. Rust along the bottom track, sun-baked vinyl liners, and standing water quickly draw insects and turn an unused feature into a physical hazard. AMI Junk Hauling handles complete pool teardown, frame disassembly, and site clearing across the parish so you get your open yard back.

We provide full-service above ground pool demolition for homeowners, landlords, and buyers. Our crew dismantles the metal ring, cuts out the liner, extracts the heavy sand base, and hauls away every piece of hardware. You do not have to drag heavy steel sheets or haul tons of wet fill to the dump yourself.

Pool Conditions We Dismantle and Clear in New Iberia

Living in South Louisiana exposes outdoor structures to extreme moisture, intense ultraviolet radiation, and tropical storm weather. Above ground pools in this climate decay quickly once regular maintenance stops, and we take them down in any state of decay.

During the first season of disuse, water evaporation accelerates under the scorching Gulf sun. Algae takes over the trapped water, and chlorine breaks down rapidly. The exposed vinyl liner above the waterline dries out, turns brittle, and cracks under intense ultraviolet exposure. We step in at this point to drain the remaining water safely and break down intact frames before structural rot sets in.

By the third year of neglect, humidity and constant rainfall start attacking the structural metal. Water pools in the bottom rails where soil and damp sand sit against raw metal edges. A steel wall rusts from the track upward, creating soft spots that buckle under pressure. Aluminum uprights oxidise, resin caps crack, and the vinyl liner collapses inward. Our crew cuts away these split walls, handles sharp rusted steel edges, and clears out dirty silt from the bottom.

After a decade, or following severe tropical storms, a pool becomes a heap of twisted metal, saturated sand, and decayed plastic. High winds can shift an empty pool frame, tearing the wall out of its track and leaving jagged metal exposed near lawn mowers or foot traffic. We haul away fully collapsed structures, overgrown sand bases, rotted timber decks, and burned-out pump equipment. No matter how long your pool has sat idle in the yard, we load and haul every component.

Managing Pool Disassembly and Yard Access

The total footprint and physical height of an above ground pool govern how our crew dismantles it. A round twenty-four-foot pool or an oval eighteen-by-thirty-three-foot model presents a massive amount of material that cannot simply be pushed over or dragged through a side gate in one piece.

We work systematically from the top rail downward. The resin caps, top ledgers, and vertical uprights come off first. Unbolting or cutting these components releases the tension on the wall. The steel or aluminum wall sheet must then be removed carefully from its bottom track. A rolled metal wall is under spring tension; if cut improperly, it can spring outward violently. Our workers unroll and slice the metal sheet into flat, manageable sections that fit safely through standard residential side gates without damaging your turf or fencing.

Handling the base material requires heavy labor. Beneath every vinyl liner sits a layer of sand or foam insulation that often weighs several tons, especially after soaking up heavy local rain. We shovel out the damp sand, move it via wheelbarrows to our haul vehicles, or spread clean fill per your instructions. If your pool features an adjacent wooden sun deck, we dismantle the decking, joists, and support posts to clear the entire footprint.

Factors That Influence Pool Teardown Pricing

Pool teardown pricing depends on the physical job requirements rather than a fixed rate sheet. Because yard access, material weight, and overall pool size vary on every property, we assess each site individually to provide a clear quote before work begins.

Summer heat and rain saturated ground change the weight of the material significantly. A dry sand base is much lighter than a wet one after a week of downpours. If water remains inside the pool, discharging it safely takes additional time before we can start unbolting the frame. The wall material also impacts labor; heavy steel walls take more effort to slice and pack than lighter aluminum frames.

Access distance from the pool footprint to our loading area plays a major role. If our team can back a trailer close to the yard gate, loading moves quickly. If we must transport heavy sand, wet liner pieces, and metal rails by hand down a narrow side yard or through multiple gates, the extra labor increases the quote. Additionally, attached decks, large pump assemblies, or hardwired electrical lines require extra teardown steps that we factor into the final price.

How to Schedule Your Pool Removal

Getting your yard cleared involves a straightforward process designed to give you an accurate price without hassle.

1. Initial Contact. You reach out to us by phone or through our site form to share the basic details of your pool.

2. Site Details and Photos. Send us photos of the pool, the surrounding deck if present, and the path from the street to your yard gate. Tell us if the pool is still holding water or if it is already empty.

3. Review the Quote. We evaluate the pool dimensions, structural materials, access route, and sand volume to send you a clear written estimate with no hidden dump fees.

4. Site Preparation. Before our crew arrives, ensure clear access to the gate. Disconnect electrical power to the pump motor or filter system at the main breaker.

5. Teardown and Loading. Our crew arrives on schedule, unbolts the frame, cuts the wall into flat sheets, removes the liner, shovels out the sand base, and loads everything into our trucks.

6. Final Sweep. We rake the exposed dirt footprint, pick up stray screws, metal fragments, and plastic debris, and haul the waste away for proper disposal.

Local Regulatory and Utility Requirements

Removing an above ground pool in the parish involves basic property safety measures, environmental utility standards, and local code considerations. Unlike in-ground pool demolitions, taking down an above ground structure does not usually demand deep earth excavation or engineered soil compaction permits. However, property owners must still respect local water discharge rules and property boundary guidelines.

Water discharge is a key concern. Chlorinated pool water or chemical wash residue should never be dumped directly into public storm drains or adjacent properties, as local environmental ordinances protect waterways from chemical runoff. Water should be dechlorinated or drained slowly across grass areas on your own parcel where it can soak into the ground without causing runoff onto adjacent land.

If your pool was installed with dedicated electrical runs, gas heaters, or permanent structural decking tied to a home enclosure, consult municipal property guidelines or the parish building office before cutting utility lines. For general questions regarding local building codes and property standards, reference the official guidance provided by the court system or municipal authority. Our team works cleanly within these boundaries to ensure your teardown is completed safely and responsibly.

Self-Hauling vs. Hiring Our Removal Crew

Homeowners who own a heavy-duty pickup truck, a flatbed trailer, metal shears, and heavy power tools may consider tackling pool teardown as a do-it-yourself project. If the pool is small, completely dry, and you have several helper friends to assist with lifting steel sheets, self-hauling can save on immediate upfront labor costs.

However, self-hauling quickly becomes frustrating for most property owners. A fully assembled pool wall is a single continuous strip of rolled steel that is awkward, sharp, and heavy. Slicing through thick metal requires reciprocating saws with specialized blades, protective gear, and experienced handling so the wall does not snap violently while under tension. Dragging raw sheet metal across a lawn can tear up your grass, damage fences, or cause severe cuts.

Disposal is another obstacle. Local landfills and transfer stations charge solid waste tipping fees by weight, and wet sand base material adds immense weight to your vehicle payload. You must also sort materials: scrap yards accept clean steel or aluminum uprights, but they reject vinyl liners, dirty sand, and PVC plumbing. Taking separate trips to scrap drop-offs and municipal waste facilities consumes an entire weekend and burns significant fuel. Hiring the crew eliminates the physical strain, vehicle wear, safety risks, and multiple landfill trips.

Material Sorting and Responsible Disposal

We do not dump an entire pool structure into a landfill when components can be reclaimed. Our team sorts dismantled pool materials on site to ensure every fraction goes to the proper receiving facility.

Ferrous metal components, including rolled steel pool walls, steel uprights, and bottom tracks, are separated and delivered to regional metal scrap processors. Non-ferrous metals like aluminum top rails, resin-coated side braces, and brass valve fittings are routed to specialized recycling streams. We also pull the electric pump motor and copper wiring for metal recovery after the PVC plumbing lines are detached.

Non-recyclable elements are handled responsibly. The degraded vinyl liner, brittle resin top caps, rubber gaskets, and flexible PVC hoses are loaded for proper municipal landfill disposal. Sand from the base is handled based on your preference: we can spread clean sand across low spots in your yard to help level the ground, or we can load and haul the wet sand to approved clean-fill drop sites. Our systematic sorting reduces environmental impact while keeping your property clean.

Who Uses Our Above Ground Pool Teardown Service?

Homeowners dealing with collapsed pool walls, home sellers preparing a property for market, real estate investors, and landlords clearing liability risks rely on our team for fast teardown. If your pool has reached the end of its useful life, let us handle the heavy lifting, dangerous metal cutting, and total haul-away. Send us your project details through the form on this page, or call us directly to get your quote: (318) 531-3627. We will get your yard cleared and back in order promptly.