Above Ground Pool Removal in Roswell, NM

Leaving a non-functioning above ground pool in your yard through another hot season brings constant headache. Intense sun degrades the materials while stagnant water attracts mosquitoes and pests. The footprint takes up space you could use for grass or a patio.

A neglected pool wall also poses a real safety hazard during sudden wind gusts across the plains. As panels warp, structural integrity fails, leaving sharp metal edges exposed in your yard. Letting it sit another year only worsens ground settling underneath.

We handle complete pool teardown, wall disassembly, and sand base removal. AMI Junk Hauling disposes of all heavy components so your yard is clear, safe, and ready for your next project.

Pool Demolition and Teardown for Damaged Units in Roswell

The intense sun and dry climate take a heavy toll on outdoor outdoor structures over time. High ultraviolet exposure bakes the vinyl liner until it becomes brittle, snaps under water pressure, and leaks down into the track. Once moisture reaches the base frame, sand traps it against the metal, causing hidden rust long before structural failure shows on top.

In the first season of neglect, small leaks wash away portions of the leveling pad, creating an unstable tilt. Resin top caps chalk, crack, and snap off under summer heat. By the third year without regular maintenance, winter cold snaps cause freeze-thaw cycles in trapped soil, expanding moisture against subterranean track segments and buckling outer wall panels.

By the tenth year, untreated steel walls often rust through near ground level. A single violent desert windstorm can catch the loose sheet metal, peeling whole panels out of their tracks and collapsing the top rails inward. We take pools in all stages of decay, including units that have already partially collapsed or lost structural balance.

We accept steel, resin, and aluminum pool frames regardless of current condition. Whether your pool is fully intact, filled with stagnant water, or rusted into fragmented pieces, our crew cuts down the structure and hauls away every piece. We also dismantle surrounding wooden decks, filter platforms, and old plumbing connections tied to the pool system.

Navigating Property Access and Demolishing Pool Structures

Getting heavy pool components off your property requires a clear path from the backyard to our hauling vehicles. We start by evaluating your gate clearances and alleyways. If equipment cannot fit through standard side gates, our team manually carries dismantled frame parts, cut steel walls, and liner sections around fences or through narrow side yards without damaging your landscaping.

Dismantling a pool requires strict adherence to physical safety steps. A drained steel wall remains under tension inside its bottom track. Simply pulling upright posts can cause thin metal sheets to spring outward violently, creating severe cut hazards. We secure the metal sheet, systematically unbolt or cut top rails, and unroll the main wall in controlled sections so it can be safely folded for transport.

The sand base beneath the vinyl liner presents the biggest physical load on the job. Tons of packed sand rest beneath even small pool footprints. We shovel out the sand, haul it by wheelbarrow to our trucks, or spread clean fill across the yard space depending on your preferences. We cut up resin components, stack aluminum rails, and extract embedded ground stakes to ensure no sharp debris remains behind.

Factors That Influence Pool Teardown and Hauling Quotes

Access from the yard to our truck directly shapes the effort required for pool teardown. Wide alley gates or driveways that let us park near the structure keep loading efficient. Narrow side yards, steps, or long hand-carry distances increase time and labor requirements.

The physical size of your pool frame dictates total debris volume and steel weight. A broad oval pool with high metal walls requires more cut time and truck space than a small round model. The presence of attached wooden decks, large filter platforms, or custom steps also adds to total material volume.

Handling the sand pad underneath is another primary driver. Transporting tons of wet, packed sand off site requires substantial weight capacity and labor compared to simply leveling the sand across the yard. Residual water inside the liner also requires careful management before frame teardown begins.

We do not post fixed online prices because every backyard setup, access path, and pool condition is unique. We evaluate your specific property conditions to provide an exact quote tailored to the job.

Step-by-Step Above Ground Pool Disposal Process

1. Initial Contact. Reach out to us with photos of your pool, the surrounding yard area, and your side gate access path. Describe whether the pool still holds water, sand, or an attached deck so we understand the job scope.

2. Detailed Evaluation. We assess your photo details, structure size, and loading distance to calculate the necessary labor and truck space. We provide a transparent quote covering all cutting, loading, and material hauling.

3. Work Site Preparation. Before our crew arrives, ensure water lines and electrical power to the pump or heater are completely disconnected. Clear any personal yard items or patio furniture along the access path leading from the pool to the street.

4. Controlled Teardown. Our crew safely drains remaining standing water, cuts vinyl liners into manageable sheets, and unrolls the steel or aluminum wall safely. We dismantle uprights, top rails, and support legs step by step.

5. Hauling and Ground Sweep. We load all wall metal, resin parts, pump equipment, and sand into our haul vehicles. The crew sweeps the area with a magnetic tool to collect loose screws, brackets, and metal shavings, leaving a clean dirt ring ready for landscaping.

Permits and Discharging Pool Water Local Requirements

Removing a domestic pool involves local rules regarding water drainage and yard safety. Draining large volumes of chlorinated or chemically treated pool water into public streets, storm drains, or adjacent properties can violate local municipal codes. In many areas, water must settle to eliminate chlorine before being discharged onto your own lawn or through designated drainage points.

Local building codes may also regulate barrier requirements. Above ground pool walls often act as their own safety enclosure under local codes. Once the structure comes down, you must ensure any required perimeter fencing remains compliant to prevent open yard hazards, especially if you have a property line fence that relied on the pool wall for security.

Check with your municipal water utility or local building department before scheduling pool disassembly. Confirming local discharge rules and permit requirements prevents unexpected local code violations during yard renovation.

Sorting Demolished Pool Materials for Recycling and Fill

Disassembling an above ground pool generates diverse materials that must be separated for proper processing rather than dumped together into a single waste stream.

Ferrous steel walls and framing posts are separated and sent to local metal scrap recyclers, where the metal is processed and melted down for re-use. Non-ferrous aluminum rails and copper wiring from old filter motors are similarly sorted for scrap recovery.

Vinyl liners, degraded resin top caps, and flexible PVC plumbing cannot be recycled through standard facilities. These deteriorated synthetic items go to licensed regional transfer stations for landfill disposal.

The clean sand base under the liner is non-hazardous clean fill. Homeowners can retain the sand for local lawn grading, garden beds, or paving prep. If we haul the sand away, it goes to fill sites or receiving facilities that handle clean earth materials.

Teardown of an Abandoned Steel Frame Pool

A local homeowner inherited an aging 24-foot round pool when purchasing a residential property. The pool had sat empty for two seasons. High winds had buckled three side wall panels inward, while intense sun split the liner, scattering dry vinyl scraps across the backyard. An attached wooden step platform blocked access to the side gate.

The owner needed the pool cleared to fulfill home insurance conditions and plant new turf. AMI Junk Hauling arrived to dismantle the platform first, creating a wide passage to the street. The crew secured the damaged steel wall, removed top rails panel by panel, and cut the main metal wall into flat sheets for safe transport.

Our team shoveled out the remaining three-inch sand base, loaded the degraded liner and frame into our trucks, and performed a magnetic sweep for hidden fasteners. The entire project took four hours, leaving a flat sand-and-dirt circle ready for fresh soil and grass seed.

Who Uses Our Pool Teardown and Removal Services?

Homeowners call us when an old pool reaches the end of its useful life, saving them from dangerous DIY cutting and heavy shoveling. Real estate agents hire our team to clear rusted structures that prevent home sales or fail buyer insurance inspections. Landlords count on us to remove high-liability pools between tenant leases.

If you inherited a collapsed pool or simply want your backyard space back, we handle the teardown, cutting, sand shoveling, and heavy hauling. Send details through our online form or speak with our team at (505) 572-0756 to get an accurate estimate and set up your teardown date.