Above Ground Pool Removal in Security-Widefield, CO

Most backyard pools in Security-Widefield end up out of use because of a single harsh winter or years of intense elevation sun. A small tear in the vinyl liner or a shifted support post often turns a summer spot into a massive yard obstacle. Once the pump stops running, local yards end up with an unsafe shell holding dirty water, decaying leaves, and thousands of pounds of wet sand base underneath.

Taking down a metal or resin structure yourself takes specialized tools and heavy hauling capacity. The steel walls are kept under tension, making them unpredictable to cut, while the underlying sand bed weighs far more than most property owners expect. AMI Junk Hauling handles the complete pool teardown process, clearing away the frame, liner, equipment, and structural bedding so you can reclaim your lawn.

How Local Weather Destroys Above Ground Pools

The high-desert climate in this region brings severe environmental stress to outdoor leisure structures. Sunlight at this altitude degrades vinyl and plastic materials, while rapid freeze-thaw cycles put extreme structural pressure on steel pool walls holding thousands of gallons of ice.

First season damage: Intense ultraviolet radiation breaks down the plasticizers in vinyl liners and resin top rails. The liner loses elasticity, becoming brittle along the waterline. Minor ground shifting during initial spring thaws can cause slight variations in the base track, putting uneven pressure along the side panels.

Third year deterioration: Repeated winter freezes turn standing water into solid ice blocks that expand outward against the steel wall. If water seeps under the pool base, frost heave lifts structural uprights out of alignment. Resin components crack under persistent solar exposure, while metal tracks exposed to moisture begin to show surface rust along the bottom seam.

Tenth year failure: Structural integrity breaks down completely. Rust eats through the bottom wall track where wet sand holds moisture year-round. Steel walls buckle inward or split under wind loads once the structure is drained, and top rails drop away from the posts. At this point, the pool becomes a safety hazard that cannot be refilled or repaired.

We accept pools in any state of decline. Whether your structure is fully intact, partially dismantled, buried in dirt, rusted through, or collapsed after a heavy storm, our crew hauls away every piece. We handle steel, resin, and aluminum frames, damaged vinyl liners, sand beds, external filter pumps, PVC plumbing, and surrounding wooden step decks.

Navigating Yard Access and Safe Equipment Breakdown

Getting heavy pool components off your property starts with assessing the path from your backyard to our hauling truck. Our team inspects side gates, overhead branches, utility meters, and fence clearances before bringing in equipment. If your gate measures under four feet wide, we plan a manual teardown using wheelbarrows and hand transport rather than motorized loaders.

The teardown follows a specific physical order to prevent thin steel walls from snapping or collapsing dangerously. Draining any remaining water safely comes first. Once the liner is empty, we slice the vinyl into manageable sections to drain trapped moisture and cut down weight. We then remove the top rails and upright posts piece by piece while securing the outer wall structure.

Unrolling the steel wall requires precise control. A perimeter wall is a continuous sheet of thin metal kept under tension. Stripping it out without proper bracing can cause the wall to spring open rapidly, creating sharp metal edges. Our crew uses heavy clamps and control lines to release the wall from its bottom track, cutting the metal into flat, compact sections for safe carrying.

The final stage involves clearing the base sand. A typical installation sits on two to four tons of masonry sand that holds dampness. We shovel out the sand, clear out the bottom track rails, and load the entire volume into our haulers without tearing up your lawn access routes.

Factors That Influence Your Removal Quote

We do not publish fixed price lists because every backyard setup in Security-Widefield presents distinct physical challenges and material volumes. A small ten-foot round pool sits on a fraction of the material required for a massive oval installation, and labor demands vary widely based on access conditions.

The season and weather conditions play a direct role in labor planning. Cold winter ground hardens sand bases, making excavation strictly a manual digging task, while wet spring ground requires ground protection mats to avoid damaging your turf. High winds also slow down the handling of large metal wall sheets.

Key variables that shape your final quote include:

• Pool dimensions and shape: Larger oval pools require heavier structural bracing and hold significantly more base sand than standard round models.
• Wall and frame materials: Heavy steel components require different cutting tools and labor handling than lightweight resin frames.
• Sand bed handling: Choosing complete excavation and removal of the sand pad adds weight and labor compared to spreading the sand across your yard.
• Surrounding decks and steps: Integrated wooden or composite decks must be dismantled separately, adding to total debris volume.
• Gate width and terrain: Long carries around narrow side yards or steep slopes increase job duration.

How to Start Your Pool Teardown Project

Clearing an unwanted pool from your yard is a straightforward process when you follow these five steps:

1. Initial contact and photos. Reach out to us with basic details about your pool setup. Sending a few photos of the pool, the surrounding yard, and your side gate helps us evaluate access and frame style immediately.

2. Site assessment and estimate. We review your photos and specs to determine required equipment, labor hours, and disposal weight. You receive a comprehensive written quote outlining every aspect of the teardown before work begins.

3. Water management. Before our crew arrives, check that the pool water is drained or notify us if pumping is required. Ensure local discharge rules are followed so water drains safely away from neighboring properties.

4. Structure teardown and loading. On job day, our team dismantles the deck, top rails, uprights, wall sheet, and liner. We load all metal, plastic, and filter hardware directly into our truck, keeping your yard orderly.

5. Base excavation and final sweep. We dig out or spread the sand base according to your plan, remove all bottom track hardware, and rake the area smooth. The crew performs a magnetic sweep to pick up scattered screws before clearing out.

Local Rules and Disposal Procedures

Above ground pools do not carry title registrations or state vehicle deeds, making ownership transfer simple. However, removing an outdoor structure involves local municipal regulations regarding water discharge, property safety, and fence barriers.

In Colorado, property standards and structural notifications are managed through local city departments or regional building offices. You can review public codes through the state portal at

Most local guidelines require that pool water containing chlorine or chemical treatments be dechlorinated before discharge. Water must never be dumped directly into public storm drains or allowed to flood adjacent yards.

Additionally, safety codes often dictate that perimeter pool fencing or self-latching safety gates must remain intact until the pool is completely taken down. Once the structure is removed, any standing water hazard is eliminated, but homeowners should check if local building officials require notification to update property safety records or adjust local tax assessments.

Where Your Old Pool Materials Go

Dismantling a pool generates several distinct material streams, ranging from recyclable metals to non-recyclable synthetic liners. We sort all components on site so materials are directed to the correct local processing streams rather than dumped indiscriminately.

Ferrous and non-ferrous metals make up the core of the recyclable material. Steel wall panels, steel uprights, and metal support struts are cut down and sent directly to regional scrap metal recyclers. Aluminum top rails and resin-coated structural parts are sorted into non-ferrous processing lines. Electric pump motors, brass fittings, and copper wiring from heater units are also reclaimed for metal recovery.

Synthetic components require municipal waste handling. The heavy vinyl liner, PVC connection hoses, resin wall covers, and plastic filter housings cannot be processed by standard municipal recycling lines and are taken to licensed transfer stations for proper landfill disposal.

The sand base offers versatile reuse options. Clean masonry sand removed from beneath your liner can often be repurposed on site for lawn leveling, paver installation, or garden beds. If you prefer full removal, we haul the sand to local clean-fill facilities that accept uncontaminated aggregate materials.

Recent Removal Example in the Area

A homeowner inherited an outdated eighteen-foot round steel pool when purchasing a home in an established neighborhood. The vinyl liner had split during a freeze two winters prior, leaving four inches of stagnant rainwater, trapped debris, and three tons of wet sand sitting in the backyard. The owner wanted the space converted into a lawn before selling the property.

Our crew arrived to find a narrow three-foot side gate, preventing machine access. We set up portable pumps to clear the remaining water into a designated turf absorption zone. The team then unbolted the rusted top rails, dismantled the upright supports, and secured the coiled steel wall before slicing it into flat, stackable pieces.

Using heavy-duty wheelbarrows, we carried out the sliced liner, steel wall, filter pump, and thousands of pounds of wet sand to our haul truck parked along the curb.

Who Uses Our Pool Teardown Services?

Homeowners, landlords, real estate agents, and new buyers across Security-Widefield call on our team when an above ground pool becomes a liability. We regularly assist homeowners dealing with failed liners, sellers needing to clear yard hazards before closing, and buyers wanting to reclaim outdoor space for gardens or lawns.

If you have an unused or damaged pool taking up your yard, let our experienced crew clear it out completely. Send us your project details through our website form, or reach out directly by phone at (888) 371-8120 to get your free estimate and schedule your teardown.