Above Ground Pool Removal in Selden, NY

An unused above ground pool takes up valuable backyard space, but taking it down yourself is a massive chore. Moving hundreds of pounds of wet sand, unrolling sharp steel walls, and hauling bulky vinyl liners deters most property owners from tackling the project alone.

Standing water turns the structure into a breeding ground for mosquitoes, while an old frame quickly becomes an eyesore. Many homeowners intend to clear the backyard over a weekend, only to realize they lack the heavy equipment and hauling capacity to finish the job.

Our team steps in to handle every phase of above ground pool teardown. AMI Junk Hauling provides complete pool disposal in Selden, clearing out the metal frame, vinyl liner, pump system, and sand base so you get your yard back.

Pool Demolition for Damaged and Abandoned Backyard Pools

Coastal New York weather accelerates the breakdown of backyard water structures. Freezing winters cause trapped water to expand, pushing outward against the liner and warping the vertical uprights. Winter frost heave shifts the ground beneath the pad, tilting the bottom track out of level and compromising the structural integrity of the frame.

Salt air from nearby waters speeds up corrosion on steel walls. Rust starts low near the damp sand base where moisture stays trapped against the metal. Once rust eats through the bottom track, the pool wall buckles under pressure. Summer sun bakes the exposed vinyl liner, making it brittle and prone to long splits at the waterline. Once the liner rips, water dumps into the surrounding yard, washing away the sand foundation and leaving a hazardous, collapsed metal ring.

We accept above ground pools in any state of decay throughout Selden. We take down brand-new pools that buyers want gone, abandoned units half-filled with stagnant rainwater, and severely rusted structures that have already collapsed into themselves. We dismantle resin, steel, and aluminum frames, whether they are round, oval, or surrounded by custom wooden decking. Our crew also disconnects and loads away filter systems, sand filters, copper wiring, PVC plumbing, pool heaters, and heavy plastic entry ladders.

No matter how long the pool has sat neglected or how bad the metal corrosion is, our crew breaks down the materials safely and hauls every piece off your property in a single visit.

Safe Teardown, Unrolling, and Backing Up Out of the Yard

The biggest issue during a pool teardown is rushing the wall removal. Draining the water leaves a sheet metal wall under high tension in its base track. Pushing a steel wall over or cutting it without securing the top rails can cause the thin metal to spring open violently, creating sharp hazards for anyone nearby. Our team unbolts the top rails and uprights in sequence, carefully controlling the unrolling process so the rolled metal is folded down safely for transport.

Narrow side yards and fenced gates present another challenge. Bringing large trucks onto suburban lawns can ruin turf and crush buried lines. We evaluate entryways before starting. If gate openings are tight, we haul materials out using heavy-duty wheelbarrows and hand carts along protective ground mats.

After the frame and vinyl liner are loaded, the heavy work remains. The sand base under a standard pool weighs several tons. We manually shovel out the compacted sand or use compact equipment if gate width permits. We haul the sand away or spread it evenly across the footprint to level the ground, depending on your preference. We ensure the entire area is cleared so you are not left with a messy pile of wet sand in the middle of your yard.

How We Estimate Above Ground Pool Teardown Quotes

We do not publish fixed price lists because every backyard access route and pool setup is unique. The overall size of the pool forms the foundation of your quote. A small twelve-foot round pool takes far less time and haul capacity than an oval pool surrounded by a full timber deck.

Your access path from the backyard to our trucks strongly influences labor time. Long carries through narrow side gates require manual hauling, whereas wide open yard access lets our crew load materials faster. Ground conditions and wet weather can also extend physical handling times.

The total weight of materials directly affects disposal fees. Sand bases add substantial tonnage to the haul, so deciding whether you want the sand removed or spread across the yard changes the final price. Surrounding wooden decks, attached pergolas, or concrete footings add extra material volume that requires additional truck space. You will receive a clear, custom estimate after sending us photos or allowing us to review the layout of your property.

Four Steps to Complete Your Backyard Pool Teardown

1. Share project details. Snap a few photos of your above ground pool, the surrounding yard, and the gate access path. Send these pictures to our team along with the general pool dimensions and whether the pool is currently holding water.

2. Get a written estimate. We review your photos, evaluate material volume, and estimate the weight of the frame, liner, and sand base. We send back a transparent estimate outlining the full removal process with no hidden surprise fees.

3. Schedule the teardown day. Choose a time that fits your schedule. Before our crew arrives, disconnect the pool pump from its electrical outlet and ensure any remaining standing water has a clear drainage path away from structures.

4. Clear the backyard. Our crew disassembles the top rails, removes the liner, unrolls the metal wall, and hauls away all hardware, pumps, ladders, and sand. We sweep up small debris, leaving behind a clear, flat pad ready for fresh grass or new landscaping.

Property Guidelines and Discharge Rules for Pool Removal

Removing an above ground structure on your property involves managing wastewater, power connections, and safety barriers. Above ground pools do not carry real estate titles or state vehicle registration tags. Once installed on a residential parcel, they are treated as personal outdoor property or temporary structures.

Discharging large volumes of chlorinated or salt water requires careful attention. Water should never be dumped directly into neighboring lots or public storm sewers without proper dechlorination. Local water management rules typically require pool water to settle or discharge slowly across your lawn to prevent soil erosion and storm drain overload. If you are handling an abandoned pool on a recently purchased property, verify local fence and barrier codes, as removing the pool may alter required enclosure boundaries.

For questions regarding abandoned property, found items on newly acquired real estate, or local regulations regarding outdoor structures, contact your local police station or police headquarters; outside a city, a State Police station or substation or a police station, police headquarters or sheriff's office of the county, town or village. They can provide guidance on statutory waiting periods and property notifications before clearing items left behind by previous occupants.

Sorting Metal, Vinyl, and Sand Material Streams

A dished or flat above ground pool generates several distinct waste streams that must be separated for proper handling. Steel wall panels, aluminum uprights, top caps, and copper pump wiring are routed directly to metal recovery processors. Ferrous and non-ferrous metals are separated on-site or at sorting centers to reduce total volume sent to regional landfills.

The vinyl liner, flexible PVC hoses, resin top rails, and filter housings go to solid waste management facilities. Heavy vinyl cannot be processed in standard municipal recycling programs due to chemical additives and outdoor degradation. Sand filter media and structural sand pads represent the heaviest material fraction. Clean sand can often be reused on-site for fill material, graded into existing low spots, or transferred to clean fill sites that take clean dirt and aggregates. Pump motors and electrical components are routed to regional scrap yards equipped to process mixed electronic and mechanical equipment.

Clearing an Oval Pool After Severe Winter Freeze Damage

A homeowner inherited a twenty-four-foot oval pool that had sat unused through several freeze-thaw cycles. Trapped ice had pushed against the end walls, blowing out two bottom tracks and leaving the steel wall bowed outward across a collapsed liner. Heavy winter rain had accumulated in the deep center, mixing with dirt, leaves, and decaying debris.

Our team arrived after the homeowner dechlorinated and pumped down the remaining murky water into the yard. We unbolted the rusted side supports, stripped the top ledges, and cut the heavy vinyl liner into manageable sections to prevent water pockets from tearing during extraction. The sharp steel wall was unrolled, bent into flat panels, and secured onto our truck.

The job required moving roughly three tons of wet sand base from the center trench. Using heavy-duty wheelbarrows, our crew cleared the wet sand through a narrow six-foot side gate, protecting the lawn along the transit route. The deck structure attached to the end was unbolted and loaded in four hours. The entire footprint was raked level, leaving the homeowner with an open, safe backyard ready for new sod.

Ready to Clear Your Yard? Contact Our Teardown Team

We work with homeowners, buyers, landlords, and property managers across the area who need fast, reliable above ground pool teardown. Whether your liner split over the winter, your children have outgrown the pool, or an insurer requires structure removal before closing, our crew gets the job done cleanly.

Stop letting an old, rusted pool consume your lawn or create a safety hazard. Call our team today at (315) 563-3011

or fill out our online request form to get your free, custom estimate. Send us a few photos of your pool and yard setup, and AMI Junk Hauling will handle the heavy lifting, unrolling, and hauling from start to finish.