Above Ground Pool Removal in Shreveport, LA

Leaving a damaged pool in your yard through another hot Louisiana spring costs more than you might think. Stagnant water breeds mosquitoes rapidly in our climate, creating a health hazard near your back porch. The structure weakens every month it sits unused, turning a simple teardown into a messy back-yard collapse.

Property insurers often flag neglected pools during routine inspections. A rusted steel wall or a tearing liner can cause your home insurance rates to jump or lead to coverage non-renewal. Getting rid of the pool before storm season hits protects your property value and eliminates ongoing maintenance expenses.

We handle complete above ground pool teardown across Shreveport. Our crew cuts down structural walls, hauls away heavy sand bases, and removes surrounding wooden decks. We clear your yard safely so you can take back your outdoor space without lifting a single heavy component yourself.

Pool Tear Down for Damaged and Abandoned Yards

High humidity and intense heat in Northwest Louisiana tear apart pool components long before their intended lifespan ends. Intense solar radiation bakes the top rails and resin caps, turning flexible plastic brittle until it snaps. Once the vinyl liner loses its elasticity, moisture creeps behind the wall. Trapped water against the lower metal track creates deep corrosion that stays hidden until the panel completely gives out under pressure.

Heavy seasonal rain and severe storm weather accelerate these structural failures. Excessive water saturates the ground under the pool, washing away leveling material and causing the steel ring to shift. A tilted frame puts massive outward tension on rusty seams, making the entire assembly unstable. We handle units in every stage of breakdown, including:

• Pools with completely split vinyl liners and exposed inner walls.
• Frame structures with rusted lower tracks and buckled side panels.
• Units half-filled with stagnant water, thick silt, and severe algae growth.
• Surrounding wooden decks with rotting joists and dangerous footings.
• Abandoned equipment setups with frozen pumps, cracked filters, and dead heaters.
• Compacted sand bases and thick foam pad underlayments.

We also accept partial teardowns where an owner started dismantling the frame but stopped when the steel sheet proved too unwieldy or dangerous to handle without specialized tools. No matter how degraded the steel frame or how thick the mud inside has become, our team brings the right gear to clear the footprint down to the bare soil safely.

How We Navigate Yard Gates and Dismantle Steel Walls

The physical footprint of an above ground pool requires a methodical tear down order to avoid property damage or injury. A typical eighteen-foot round unit occupies a massive area, and the thin steel wall remains under continuous tension while assembled. Trying to collapse the structure randomly can send sharp metal springing outward into nearby fences or house siding. We measure gate clearance first to decide whether we can move equipment directly into the yard or carry materials out by hand.

Our team begins by cutting away the vinyl liner and unbolting the top rails and resin caps. We systematically release the structural uprights and unroll the main metal wall out of its bottom track. That continuous sheet of metal has razor-sharp edges and must be sheared into manageable flat panels immediately. We bundle these steel strips securely so they can be carried through narrow side yards without scraping against your home.

After the frame is down, we tackle the massive sand base underneath. A standard pool base contains tons of packed sand resting on clay soil. We shovel and wheelbarrow this material out to our trucks, or spread it evenly across your lawn if you prefer to level out the yard depression. All heavy PVC lines, pump assemblies, and aluminum ladders are loaded out swiftly, leaving a smooth, flat surface behind.

Factors That Influence Your Disposal Quote

Every pool teardown job presents unique physical challenges, which is why we never quote standard published figures. The overall size of the pool frame is the primary factor, as a twenty-seven-foot pool contains significantly more metal sheeting, vinyl liner material, and structural steel than a small round unit. The total height of the wall also changes the mass of scrap material coming off your property.

Access conditions between your driveway and the backyard greatly impact the work involved. Short, flat carries through wide gates take less manual effort than navigating steep slopes, tight side alleys, or steps. The path from the pool pad to our loading vehicle dictates crew sizing and how fast materials move off site.

Additional project components also shape the overall scope of work, including:

• Whether the underlying sand base needs full excavation and haul-away or on-site spreading.
• The presence of an attached wooden or composite deck that requires demolition.
• Standing water volume and whether pumping is necessary before cutting the liner.
• The metal composition of the rails, uprights, and wall components.

We evaluate these specific site variables to give you an accurate, clear quote tailored directly to your yard layout and material volume.

Four Steps to Complete Pool Teardown

1. Send your project details. Take a few photos of the pool, the surrounding yard area, and your side gate entrance. Let us know if the unit still holds water or if a wooden deck is attached to the frame. Contact our team to share these photos so we can assess the scope of work.

2. Receive a written estimate. We analyze your photos, evaluate gate dimensions, calculate estimated scrap weight versus landfill volume, and review access notes. We send back a transparent estimate covering all labor, equipment cutting, haul-away, and proper material disposal.

3. Prepare the work area. Clear lawn furniture, outdoor toys, and potted plants from the path between the pool area and the driveway. Disconnect the electrical connection to the pump filter at the breaker box before our crew arrives on site to ensure total safety during teardown.

4. Watch your yard open up. Our crew arrives with steel shears, power tools, and haul trucks. We cut down the frame, extract the liner, haul away the sand base, and sweep up all small metal hardware before completing a final walkthrough with you.

Local Guidelines and Water Discharge Regulations

Removing a pool structure in this region requires attention to local property standards and water discharge practices. While above ground units generally do not involve the heavy permits required for in-ground excavations, local codes govern how large volumes of pool water are released into the environment. You must ensure chlorinated water is properly dechlorinated before draining to avoid sending harmful chemicals into local storm drains or neighboring properties.

If you inherited a property with an unmaintained pool or need to resolve code compliance issues involving abandoned structures, formal documentation may be necessary. For property titles, legal ownership disputes, or abandoned property processing, owners should consult the appropriate

or state law enforcement authorities to verify title status before scheduling structural removal. Checking local fencing and safety barrier ordinances is also smart, as removing a pool may change your property enclosure requirements under city rules.

We help keep your project fully compliant by removing all discarded waste, electrical accessories, and scrap metal according to municipal environmental standards. Our team works cleanly and ensures your backyard meets local code expectations once the frame is removed.

Where Your Disassembled Pool Materials Go

A dismantled pool consists of several distinct material types, each requiring a different disposal path. We do not throw everything into a single trash bin. Instead, we sort the components at the job site to maximize recycling and minimize environmental waste in local landfills.

The heavy structural components provide valuable scrap metal. Steel wall panels, bottom tracks, and support vertical posts go directly to local metal processors. Aluminum top rails and hardware enter non-ferrous scrap streams where they can be melted down and reused for industrial manufacturing.

Other materials travel through specific waste channels:

• Vinyl liners, resin top caps, and rigid PVC plumbing pipes go to municipal solid waste facilities.
• Electric pump motors, brass fittings, and copper wiring are processed with commercial scrap electronics.
• Clean sand from the base is diverted to local construction contractors for site grading or used as clean fill material.

By handling each material fraction separately, we keep bulk waste out of local dumps while ensuring all metal components are recycled properly.

Tearing Down an Old Pool in Broadmoor

A homeowner in an established neighborhood had an old twenty-four-foot round pool that sat unused for over three seasons. The vinyl liner had split during a heavy summer rainstorm, leaving a thick layer of wet sand, leaves, and mud stuck at the bottom. The steel wall had begun rusting along the ground line, making the entire metal structure an eye-sore and a potential safety hazard for neighborhood kids.

The side access to the backyard was tight, measuring just under four feet between the brick house wall and the wooden property line fence. Getting heavy machinery into the yard was impossible without taking down fence panels, so the job required manual teardown and hand-hauling.

Our two-person crew cut the top rails into sections, unscrewed the upright posts, and unrolled the massive steel wall in controlled four-foot strips. We sheared the sharp sheet metal flat and carried it safely through the narrow side passage. Using heavy-duty wheelbarrows, we removed four tons of wet sand base from the lawn in under three hours. The team swept the entire yard, leaving the homeowner with a wide, open lawn space ready for fresh grass seed.

Ready to Clear Your Yard of an Old Pool?

Homeowners getting ready to sell, landlords removing liability hazards, and buyers who inherited a broken pool all trust our crew to clear their backyards. Whether your liner is shredded or the frame is rusting away, AMI Junk Hauling delivers fast, safe teardown service tailored to your property.

Send your photos and yard details through the simple contact form on this site, or call our team directly to talk over your project: (318) 531-3627. We will review your job details and send you a clear, written estimate so you can schedule your pool teardown today.