Deck Removal & Demolition in Evans, CO

An aging wooden structure sitting through high-plains seasons does not improve with age. Year after year of harsh weather bakes the boards, splits the posts, and pulls the structural fasteners straight out of the ledger board. What started as a small bow in the top rail turns into a sagging, unsafe safety hazard attached directly to your home.

Leaving a compromised structure standing only increases your personal liability and delays home projects. Over time, moisture gets trapped between the ledger and the house rim joist, creating unseen rot inside the exterior wall framing. The longer an old frame sits exposed to severe weather cycles, the more extensive the damage becomes to the house itself.

We handle complete structural teardown and disposal across the area. Our team strips the boards, cuts down the joists, dismantles the main framing, and carries all debris off your property in a single visit, leaving you with a clean, clear yard ready for whatever project comes next.

Structural Teardowns for Sun-Baked and Weathered Platforms

High elevation, intense sunshine, and rapid temperature shifts destroy outdoor wooden structures faster than almost anything else. Intense sunlight bakes the top finish off the wood, causing deep cracks along the grain. Rain and winter slush soak into those open cracks, freeze solid, and expand, splitting joists and snapping rusty structural screws down inside the frame.

We routinely dismantle structures in every stage of physical failure across Evans. We handle sagging platforms, rotted joists, twisted stairs, and unstable multi-level structures. Weathered wood, composite boards, pressure-treated lumber, and heavy timber framing are all within our scope. If a storm has partially detached your platform from the house exterior, we safely step in to perform a controlled teardown before it pulls away completely and damages your siding.

Our team accepts complete structures regardless of their present condition. We clear away framing where wood rot has completely compromised the structural integrity, platforms overgrown with weeds, and sections collapsed onto lower ground. We also dismantle custom built-in benches, wooden planters, overhead pergolas, multi-tiered staircases, and surrounding privacy screens attached to the main layout.

No matter how brittle, splintered, or structural unstable the platform has become over years of exposure, our crew tears it down systematically. We strip every board, dismantle the frame, pull out support posts, and load all waste into our trucks. You do not need to prepare the area, pull nails, or pre-cut framing. We handle the manual labor, heavy lifting, structural disassembly, and final debris cleanup from start to finish.

Safe Dismantling and Ground Clearance Procedures

What goes wrong during structural teardowns usually comes down to narrow gate openings, buried utility connections, and delicate obstacles located directly underneath the floor structure. Homeowners often do not realize that heavy AC compressors, outdoor basement window wells, or gas meters sitting beneath a frame require careful, manual dismantling rather than aggressive pulling or dropping of heavy lumber.

Our crew begins from the top down and works from the outer railing inward toward the home wall. We remove handrails, balusters, and surface decking first to unburden the main frame. Next, we systematically unfasten joists from their metal hangers and lower them down carefully. Leaving the ledger board attached to the home until the end keeps the frame rigid and safe while the crew works on the outer perimeter.

When working over delicate ground, air conditioners, or flower beds, we manually hand down dismantled lumber piece by piece rather than dropping whole sections. High second-story platforms are safely taken down using controlled lowering lines or sectioned drops to protect your yard, siding, and nearby fences from heavy impact damage.

Once the frame is down, we address the support posts. Posts are either cut off clean below ground level or completely extracted from their concrete footings depending on your landscaping plans. After all wood and metal hangers are loaded, our crew runs a high-powered magnetic sweep over the entire lawn and work zone to collect dropped screws, hidden nails, and metal hardware before leaving.

Understanding Your Demolition and Removal Quote

Seasonal weather conditions affect work pacing and equipment setup, making winter teardowns on frozen ground different from straightforward summer removals. Cold weather and packed snow require extra safety prep around the work zone, while high summer temperatures demand careful handling of hot metal fasteners and dry, splintered wood. We evaluate each property individually to provide a clear, binding estimate.

Overall square footage and elevation above grade are the main factors in determining total labor hours. Elevated second-story teardowns take longer because every joist and heavy beam must be systematically lowered to ground level. Multi-level designs, integrated steps, heavy timber framing, and thick composite materials also add weight and require additional saw blades and cutting time.

Sub-structure access plays a key role as well. Working around underlying patio paving, low-clearance crawl spaces, or tight fence gates slows down material transport to our haul trucks. If you require concrete footings completely dug up rather than cutting posts off at ground level, that extra soil excavation work adds to the final quote.

We do not publish fixed rate tables online because every residential property layout presents unique physical constraints. AMI Junk Hauling delivers straightforward, upfront quotes that cover all labor, safety gear, tool usage, total haulage, and proper C&D material disposal without hidden fees.

Four Steps to Clear Your Yard

1. Request an Estimate. Contact us with basic details about your structure. Tell us the general dimensions, height off the ground, primary material, and whether you want support footings left in place or completely pulled out. Photos of the layout help us evaluate access path restrictions quickly.

2. Receive a Fixed Quote. We review your structural details and property layout to provide a direct quote covering all labor, heavy cutting, loading, and disposal. You know the exact cost before any work begins on your property, without surprise add-ons on site.

3. Scheduled Teardown. Our crew arrives with demo saws, prying tools, structural supports, and safety equipment. We isolate the work area, protect underlying fixtures or landscaping, and tear down the structure systematically from the top railing down to the main ledger board attached to your house siding.

4. Final Cleanup and Magnet Sweep. We load every piece of lumber, composite board, joist hanger, and rotted post into our haul truck. After removing all debris, we perform a thorough magnetic sweep across your grass and driveway to pick up loose nails, hardware, and metal splinters before leaving.

Local Building Department Requirements and Siding Protection

Removing a residential structural platform attached to a house often requires coordination with municipal building offices or local code enforcement, especially if structural modifications affect building exits. While simple ground-level platforms might not require formal plan reviews, attached upper-level teardowns frequently need demolition permits or inspections to verify house framing integrity. You can review state regulatory standards through the Colorado General Assembly statutory resources.

The primary concern during any ledger board removal is protecting the house wall. The ledger is secured directly to the house rim joist using thick lag bolts or structural screws. Removing these heavy fasteners leaves open holes in your exterior siding, exterior insulation, and house wrap. If improperly handled, these penetrations allow rainwater and meltwater straight into your interior wall framing.

When our team detaches the ledger board, we work carefully to prevent tearing away exterior wall sheathing or surrounding siding panels. If we uncover hidden wood rot or water damage behind the ledger, we notify you immediately. Closing these wall penetrations and installing new flashing or siding is a specialized carpentry service that should be completed immediately after structural removal to maintain a weather-tight building envelope.

Diy Teardowns Versus Complete Removal Services

If you own a heavy-duty reciprocating saw, crowbars, safety equipment, a high-capacity utility trailer, and have healthy helper support, tackling a small ground-level platform yourself can save money. DIY removal works well for small, low platforms where framing is easily unbolted and wood boards are short enough to transport without extensive pre-cutting.

However, self-hauling large structural waste often presents unexpected headaches. Pressure-treated lumber is classified as construction and demolition (C&D) waste due to chemical preservatives. Municipal bulk trash pickup will not collect full structural framing from the curb, meaning multiple trips to regional transfer stations. Trailer rental fees, gate disposal fees by weight, fuel costs, and wasted weekends add up fast.

Tackling second-story platforms without commercial scaffolding or fall protection carries serious physical danger. Rotted ledger boards can tear unexpectedly under pressure, collapsing framing onto anyone standing underneath. Furthermore, thousands of rusted nails and snapped structural screws scattered across dry lawns create flat tire hazards for vehicles and lawnmowers.

Hiring AMI Junk Hauling eliminates personal injury risks and physical strain. Our team brings reciprocating equipment, commercial demolition tools, experienced crews, and heavy-capacity haul trucks. We handle the heavy lifting, dangerous overhead teardown, loading, and proper disposal in a single efficient visit.

Resolving High-Plains Weather Damage on Older Homes

Late fall weather on the high plains often brings sharp freezes and sudden winter storms. A property owner called us after a severe winter storm caused an aging second-story platform to partially pull away from the house wall. Years of harsh sunshine had dried out the framing, and heavy snow load finally sheared the top structural ledger bolts, leaving the outer railing resting dangerously at an angle over a basement window well.

The property layout presented tight working conditions. A narrow wooden fence gate limited back-yard equipment access, and a central central air conditioning condenser unit sat directly under the sagging joists. Lowering whole structural sections whole was impossible without risking damage to the home utility systems or neighboring fence line.

Our two-person crew secured the loose platform using adjustable temporary support posts to stabilize the weight. Working carefully from ladders, we stripped the decking boards individually and hand-passed them down to ground level away from the air conditioner. We then cut joists into manageable four-foot lengths, keeping full control over every piece of lumber.

The entire second-story teardown took five hours. We backed our haul truck down the driveway, loaded all pressure-treated lumber, metal hangers, and rotted ledger pieces, and completed a detailed magnetic sweep of the turf. The home was left completely safe, with the open wall cleared for immediate siding repair before winter weather set in again.

Need an Old Deck Dismantled and Hauled Away?

Homeowners preparing for fresh landscape installs, buyers inheriting unsafe outdoor structures, landlords addressing tenant liabilities, and sellers resolving home inspection flags all rely on our local services. Whether your platform is sun-baked, split from heavy snow load, or showing signs of wall ledger rot, our experienced crews are ready to help. Getting rid of an unwanted outdoor frame is simple and fast with our complete teardown solutions.

We supply the labor, heavy cutting tools, loading capacity, and total disposal so you do not have to lift a finger. Send us details about your property layout or call us today at (888) 371-8120 to get an immediate estimate for your project. makes structural teardowns fast, safe, and entirely effortless from start to finish.