Deck Removal in Plantation, FL

AMI Junk Hauling Truck
Deck Dismantling & Complete Haul-Away! 🔨FREE ESTIMATE
AMI Removal Specialist with Crowbar
Planks, Rails & Concrete Footings Cleared 🏗️(786) 964-4049
AMI Removal Specialist with Dolly
SCROLL DOWN TO CALL THE CREW

Leaving a damaged deck in your yard through another storm season costs far more than removing it today. High winds in South Florida turn loose railing sections and warped boards into flying debris that threatens patio glass, screen enclosures, and neighboring homes. Water collects under split framing, speeding up decay against the house structure.

Old wood also draws termites and moisture-seeking pests straight toward your main living area. A compromised outdoor platform poses a major safety risk to your family, guests, and pets every single week it remains standing in your space.

Our crew handles complete deck teardown across the area. We dismantle the entire framework, pull out the embedded posts, clear out every loose fastener, and load the waste directly into our trucks for proper disposal.

Population
93,169
County
Broward County
Nearest landmark
Heritage Park 1.4 mi
Climate zone
Lower East Coast

Dismantling Sun-Baked and Storm-Damaged Outdoor Structures

The intense coastal climate along the Lower East Coast breaks down outdoor wooden structures faster than almost anywhere else in the country. Near-constant ultraviolet exposure strips away protective finishes, causing pressure-treated lumber to check, cup, and splinter open. Heavy tropical rain poured over intense summer heat traps humidity under decking boards, rotting out the joists, rim joists, and main beams long before the surface looks completely unsafe from a distance.

Salt air accelerates fastener corrosion. Galvanized joist hangers, lag bolts, and structural screws weaken, rust, and split open treated wood over time. In this environment, a structure that seems solid under foot can actually be detached from the house wall behind its ledger board. We accept decks in every state of decay, including those affected by:

  • Severe structural rot along joists, beams, and main support posts
  • Termite infestation, interior hollow wood, and fungal decay
  • Board cupping, warping, severe cracking, and raised screw heads
  • Storm damage, loose railings, collapsed stairs, and uplifted sections
  • Rusted ledger attachments, failed hangers, and split rim joists
  • Composite decking with sagged wood framing underneath

Whether your structure is a small ground-level platform or a multi-tier teardown, our crew carries the proper tools to take it apart safely. We handle full deck demolition so you do not have to worry about collapsed wood or loose nails during the next big storm season.

Navigating Side Yards, Gates, and Sensitive Grounds

The approach to your back yard dictates how we organize the teardown and haul away process. We evaluate the path from our truck parked in the driveway or along the curb right to the deck. Our team works through narrow side yards, gated pool enclosures, low tree canopies, and tight spaces between properties without causing damage to your turf, outdoor lighting, or landscaping beds.

We break down the structure in a strict reverse order for safety and efficiency. First, we remove the railing systems, spindles, and top caps. Next, we strip away the decking boards to expose the support frame. We cut joists away from joist hangers and lower main support beams controlled and piecewise. The ledger board comes off the house wall last, ensuring the main weight stays supported until the structure is ready to come down completely.

Underneath the framework, we carefully work around sensitive obstacles. Air conditioning condensers, pool pump equipment, irrigation valves, and exterior utility lines are shielded during dismantling. High ground-level drops or second-story accesses are handled with controlled drops or direct piece-by-piece carries to prevent lawn damage. We finish every job with a rolling magnetic sweep across the entire area to catch loose screws and nails.

Factors That Influence Your Demolition and Removal Quote

The overall footprint and physical size of your structure serve as the main baseline for any quote. Height above grade changes how our crew works, as second-story platforms require fall precautions, controlled lowering, and extra labor time compared to a flat ground-level platform. Multi-tier layouts with built-in bench seating, custom steps, or wide staircases increase total material volume.

Access conditions from the yard to the loading truck affect project time. Long carries through tight gates or around dense landscaping take longer than direct access down a wide driveway. The structural materials involved also change heavy load handling. Dense composite boards weigh substantially more per foot than aged softwoods, requiring more physical effort to transport.

Post removal options impact labor and equipment requirements. Cutting posts flush at ground level is faster than unearthing deep concrete footings buried in dense ground. We review these choices clearly with you before starting work so you know what is involved. We provide clear, upfront quotes without hidden fees once we assess the project details.

How to Schedule Your Deck Teardown Step by Step

Getting rid of an old, unsafe outdoor structure on your property is straightforward when you rely on our team. Follow these five simple steps to complete your teardown project from start to finish:

1. Initial contact. Reach out to our office through our online form or give us a quick phone call. Share basic details about your structure, its location on the property, and overall condition.

2. Share project photos. Send clear photos showing the deck boards, railings, stairs, and the access path down your side yard or driveway. This helps us gauge volume and structural complexity accurately.

3. Receive your quote. We provide a clear estimate outlining all labor, dismantling, loading, and disposal tasks so you know exactly what to expect before work begins.

4. Site preparation. Clear off outdoor furniture, grills, planters, and personal items from the structure and the clear pathway leading to our trucks.

5. Complete removal day. Our crew arrives, safely takes down the structure, pulls or cuts posts, loads out all debris, performs a magnetic sweep for nails, and leaves your yard completely clean.

Permits, Wall Integrity, and Local Requirements

Removing or replacing an attached structural platform often involves local construction standards and permitting guidelines set by municipal authorities. If your deck teardown is part of a larger outdoor renovation or house construction project, the replacement permit usually covers the initial structural removal. For standalone teardowns, checking local building standards is always recommended.

When our team removes the ledger board attached to your house, we pay special attention to the home's exterior wall. Moisture often gathers behind old ledger boards over time, causing hidden rot on the sheathing or siding. We carefully unbolt the ledger board to protect your home's structural framing. While our crew handles complete structural removal and haul-away, repairing existing exterior wall rot or replacing siding remains a specialized carpentry service that homeowners arrange with a general contractor.

For abandoned properties or commercial sites, statutory guidelines govern structural adjustments and cleanups. You can review Florida statutory rules through the county treasury / county treasurer (receives the unclaimed balance of the sale proceeds); the statute names no agency to administer the removal itself resource page. We ensure all waste materials collected from your property are handled and transferred legally throughout the process.

Sorting Waste and Managing Material Disposal Streams

Demolition generates several distinct waste streams that must be processed correctly. Pressure-treated lumber, which contains chemical preservatives to resist rot and termites, cannot go into clean wood processing or mulch streams, and it must never be burned. We haul all treated framing, joists, and decking to approved construction and demolition facilities for proper disposal.

Composite materials require specialized handling as well. Synthetic decking made from wood fibers and plastic blends goes to designated industrial processing sites. Other components from the job are separated and recycled whenever possible:

  • Galvanized steel joist hangers, structural bolts, and metal railings go to scrap processors
  • Untreated cedar or natural wood elements are diverted to wood recycling streams
  • Concrete footings, if excavated, are transported to concrete crushing and aggregate facilities
  • Vinyl railings and plastic hardware are processed through landfill C&D channels

By sorting waste fractions responsibly, AMI Junk Hauling minimizes unnecessary landfill loads while guaranteeing that hazardous treated woods are discarded in strict accordance with environmental rules.

Recent Removal Project on a Residential Suburban Lot

A homeowner on a residential lot had a twenty-year-old pressure-treated rear deck that had become a structural hazard. The deck was attached to the home above a concrete patio, with an air conditioning unit positioned directly beneath the main support joists. Years of severe summer humidity and tropical rainfall had completely rotted the rim joist, causing several decking boards to warp and pull away from rusted screw heads.

The owner needed the rotting platform completely removed before a new paver patio installation could begin. Access was restricted to a four-foot side gate running alongside a manicured hedge. Our crew arrived in the morning and systematically stripped the top railings, decking, and outer stairs. We lowered joists piece by piece around the air conditioning condenser without making contact with the unit or lines.

The team unbolted the main ledger board safely, inspected the underlying house wall, and cut support posts cleanly at grade per the owner's request. After carrying all heavy lumber through the side gate to our truck, we ran a thorough magnetic sweep across the grass and concrete pad. The entire teardown was finished in a single afternoon, leaving a cleared site ready for the hardscaping crew.

Who Uses Our Teardown and Removal Services?

Homeowners replacing aged outdoor platforms, buyers inheriting unsafe wooden structures, landlords eliminating safety hazards, and property owners preparing for hardscape projects rely on our crew. We help you clear your yard quickly without heavy lifting or disposal hassles.

When you are ready to reclaim your outdoor space and eliminate safety hazards, our team is ready to help. Send details through the contact form on this page or give us a direct call today at (786) 964-4049 to discuss your project and get a prompt estimate for complete removal.

Deck Removal & Demolition in Plantation: questions

Do you take out concrete footings during deck demolition?
We can cut support posts flush at ground level or dig out concrete footings entirely. Digging out footings requires extra labor and machinery, so we discuss your plans for the yard beforehand to recommend the right option.
What happens to the house wall after the ledger board comes off?
We remove all structural bolts, hangers, and wood clean off the rim joist. We take care not to damage your house wall, but fixing existing rot, installing new flashing, or repairing siding is specialized carpentry work.
Can your crew remove an elevated or second-story deck?
Yes, we routinely dismantle elevated platforms. Our crew uses controlled drop techniques and safety gear to break down second-story structures piece by piece without endangering your lawn or property.
Do I need to get a permit for full deck removal?
Permit rules depend on local municipal building codes and whether you plan to build a replacement structure immediately. If you are building a new deck, the new construction permit often covers the teardown.
Will you leave stray screws or nails in my yard?
No, we conduct a magnetic sweep of the entire work zone, lawn, and pathways after loading all debris. We pick up loose nails, screws, and metal bracket fragments to keep your yard safe for pets and foot traffic.
How does high humidity in South Florida affect old deck frames?
Trapped moisture and intense heat cause joists and ledger boards to rot out from beneath, often while top boards still appear solid. Heavy rains also accelerate fastener rust, loosening the entire framework.
Can you work around pool pumps or outdoor air conditioners beneath the deck?
Yes, we frequently dismantle structures built over or around air conditioning units, pool plumbing, or irrigation manifolds. We carefully hand-lower framing members to protect all utility equipment underneath.

Get a quote in Plantation

Tell us what you have and where it sits. We handle the loading.

No obligation. We come to you and quote on the spot.