Shed Removal & Demolition in Kendall, FL

Leaving an aging shed in your yard through another storm season turns a simple teardown into an urgent safety hazard. High winds, heavy moisture, and termites steadily weaken framing, loose roof panels, and rotted skids. What could be taken down in a clean, controlled afternoon becomes a pile of dangerous debris spread across your lawn during the next tropical disturbance. Waiting only increases the risk of damage to nearby fences, power lines, or your home.

AMI Junk Hauling takes down worn wooden outbuildings, metal structures, resin sheds, and playhouses across Kendall. Our crew dismantles the building piece by piece, clears the contents if needed, sorts the materials, and hauls everything away. You get your outdoor space back without spending your weekend swinging a sledgehammer or hauling heavy loads to the local landfill.

Outbuildings We Dismantle and Conditions We Accept in Kendall

The climate in South Florida is exceptionally harsh on outdoor structures. Year-round high humidity, relentless sun exposure, and intense summer rains drive moisture deep into wooden framing, leading to rot at the sill plate and bottom runners. Termites quickly invade damp wood resting near the soil, eating away structural integrity from the inside out. Metal sheds face rust around fasteners and bottom panels where standing water collects. Resin sheds warp and become brittle under prolonged ultraviolet radiation, causing panel seams to split and roof panels to buckle.

We dismantle structures in virtually any state of decay throughout Kendall, including:

• Rotted wooden sheds: Wood-frame structures with sagging roofs, rotted floorboards, soft joists, or insect infestation.
• Corroded metal buildings: Steel or aluminum sheds with rusted wall panels, stripped bolt holes, or collapsed roofs.
• Brittle resin and vinyl sheds: Plastic outbuildings with cracked floor pans, warped wall sections, or failed corner connectors.
• Partially or fully collapsed structures: Sheds flattened by falling branches, severe weather, or long-term structural failure.
• Sheds filled with unwanted items: Outbuildings packed with old lawnmowers, broken patio furniture, moldy boxes, and general trash.

We handle unpermitted accessory structures that do not require complex structural demolition permits. We routinely take down backyard tool sheds, chicken coops, playhouses, lean-tos, shade frames, and small plastic or metal storage units. However, our service has clear boundaries. We do not dismantle garages, houses, barns, or any structure attached to a residential dwelling. We do not perform structural demolition on buildings set on permanent deep concrete foundations, and we do not touch structures containing asbestos siding or active utility hookups.

Navigating Tight Access and Careful Demolition

The biggest challenge during a teardown is rarely the structure itself; it is the tight working space around it. In many local neighborhoods, sheds are tucked into narrow side yards, placed directly against concrete block property walls, or surrounded by dense tropical foliage, citrus trees, and patio enclosures. A crew cannot simply push a wall over without risking damage to nearby structures or private property. Dismantling must happen from the inside out, piece by piece, in a deliberate sequence.

Our process begins by clearing any interior contents to create safe working room. Next, the crew removes doors, windows, and trim panels. The roof framing comes down next, followed by individual wall sections. Walls set close to fence lines or neighboring properties are carefully detached and lowered inward into the interior footprint of the shed.

Anchors are the critical final detail that many attempt-it-yourselfers overlook. Steel augers driven deep into sandy soil, heavy rebar stakes, or masonry anchors bolted to concrete pads must be extracted or cut flush with the ground. Once the structure is down, the crew manually carries the debris through side gates or narrow walkways to our haul vehicle. We finish every job with a thorough magnet sweep across the grass and driveway to catch loose nails, rusted screws, and sharp metal shavings before we depart.

How We Calculate Your Teardown and Haul Quote

Physical access from the yard to where our truck can park is the primary factor in determining the total labor required. A wide, clear path down a side yard allows fast transport of dismantled lumber and panels. A long carry through a screened pool enclosure, around tight landscaping, or through a narrow pedestrian gate adds time and hand labor to the job, which influences the final estimate.

Every outbuilding project is quoted individually after reviewing photos or conducting an on-site evaluation, and we do not publish fixed price lists. The key variables that shape your custom quote include:

• Footprint and total height: Larger buildings yield higher debris volume and take more time to take down safely.
• Construction materials: Heavy wooden framing and asphalt shingles weigh significantly more than lightweight aluminum or plastic panels.
• Structural condition: Standing, stable structures are dismantled systematically; collapsed or leaning structures require cautious, specialized handling to prevent injuries.
• Slab and ground anchor removal: Leaving a concrete pad in place is straightforward, but breaking up and removing a slab requires specialized concrete equipment and heavier disposal handling.
• Volume of interior contents: Outbuildings packed full of personal property require junk sorting and removal before physical teardown can begin.

Step-by-Step Outbuilding Removal Process

Getting an old storage structure cleared from your yard is simple and straightforward. We handle the physical labor, sorting, and hauling from start to finish.

1. Initial inquiry and photos. You reach out to us by phone or online form. Share a few clear photos showing the structure, its interior contents, and the path leading from the yard to the driveway.

2. Detailed proposal. We evaluate the construction material, footprint, access route, and site conditions, then send you a firm, transparent written quote outlining all labor and disposal costs.

3. Scheduling your project. Once you approve the proposal, we set a date and arrival time window that fits your weekly schedule.

4. Utility and safety check. Before physical work starts, you confirm that all electrical lines, solar connections, or water supply hoses connected to the structure have been disconnected.

5. Controlled teardown and haul. Our team arrives, removes any contents, systematically disassembles the roof, walls, and base, then carries all materials to our truck.

6. Site cleanup and inspection. We perform a comprehensive sweep of the work zone, run a magnet over the grass for loose metal, and invite you to inspect the clean site.

Property Limits, Permits, and Unpermitted Structures

In South Florida, small detached storage structures under specific footprint thresholds generally do not require a formal demolition permit, provided they do not feature permanent concrete footings, electricity, or plumbing. However, local building rules vary by community, residential zoning district, and homeowner association guidelines. Property owners are encouraged to verify local setback rules and structure guidelines before removing or replacing a shed on a lot line.

Our company specializes strictly in the removal of small, unpermitted accessory structures. We are a specialized teardown and hauling service, not a licensed general demolition contractor. If your local building authority requires a formal permit, or if the building is attached to a primary dwelling, sits on a deep engineered foundation, or contains active utility connections, the job must be handled by a licensed demolition contractor.

For questions regarding property titles, abandoned personal belongings left on rental real estate, or tenant property procedures in Florida, review official statutory guidance provided through the

We assist homeowners, landlords, and estate administrators by efficiently clearing detached non-residential outbuildings across the region once ownership and property rights are fully established.

Self-Hauling vs. Hiring a Specialized Teardown Crew

Tackling a teardown yourself can seem like a cost-effective choice if you own basic tools, a heavy-duty pickup truck, and a free weekend. If the structure is a small resin shed that easily unsnaps and fits neatly into an utility trailer, self-hauling is often the most economical route. However, wooden and metal outbuildings quickly present unexpected challenges for home owners working alone.

Demolishing a frame structure with hand tools carries real risks. Pry bars and reciprocating saws can kick back, and swinging a sledgehammer at rotted wood can cause unexpected ceiling collapses. Handling rusted sheet metal panels without heavy cut-resistant gloves and forearm guards frequently results in severe lacerations. Furthermore, modern asphalt shingles, pressure-treated lumber, and corroded steel generate massive volume. A standard pickup truck bed fills up after taking down just one wall section, leading to six or seven time-consuming round trips to regional disposal facilities.

Commercial dump fees for construction debris, mixed waste, and heavy asphalt materials add up quickly, not to mention the cost of rented saw blades, pry bars, and fuel. Hiring AMI Junk Hauling eliminates the physical exhaustion, risk of injury, and repeated driving. Our crew brings the right tools, breaks the structure down efficiently, loads the debris into a single large-capacity vehicle, and leaves your yard completely spotless.

Representative Local Project Scenario

A property owner in a mature residential neighborhood needed to replace a rotted 10x12-foot wooden shed that had been tucked into a rear corner of the property for over fifteen years. High humidity and years of heavy summer rains had completely rotted the bottom runners, causing the floor to cave in and the side walls to lean against a neighbor's chain-link fence. The owner was installing a new PVC privacy fence, but the fence installer could not proceed until the old structure was entirely removed.

Access to the backyard was restricted to a three-foot-wide side gate between the main house and a concrete wall. The shed was also half-filled with old lawn equipment, broken garden pots, and decayed wood trim. The property owner could not safely dismantle the leaning wall without knocking down the neighbor's fence line.

Our crew arrived at 8:00 AM. We first cleared the interior debris, sorting metal scrap from general trash. Working inside the footprint, the crew unroofed the asphalt shingles, unbolted the rafters, and pulled the leaning wall sections inward away from the property line. The rotted floor and ground runners were pried up, and four steel auger stakes were cut flush below the soil line. After hand-carrying all debris through the narrow side gate to our truck, we swept the entire grass area with a rolling magnet to collect loose nails. The site was completely clear by noon, allowing the fence installers to start work the next morning.

Who Uses Our Teardown Services in Kendall?

Homeowners preparing for storm season, buyers who inherited decaying backyard structures, and real estate agents clearing flagged inspection items regularly call on us. Landlords needing to clear non-compliant tenant structures and property owners replacing old outbuildings with new landscaping also rely on our team. When you need a fast, safe, and complete teardown, is ready to clear your yard.

Send the details through the form on this page, or call and describe it: (786) 964-4049. You get a figure back in writing.