Shed Removal in Kenner, LA

An old shed sitting in a Kenner back yard rarely stays sound for long. Heat, constant moisture, and ground dampness rot bottom plates, warp doors, and pull fast fasteners out of soft framing. What started as useful storage becomes an unsafe eyesore that takes up space and harbors pests.

AMI Junk Hauling handles complete unpermitted shed removal across the local area. We bring the right tools to dismantle wooden outbuildings, metal storage units, and resin plastic sheds safely without tearing up your turf or breaking down your property lines.

Our team strips the building down step by step, pulls up ground anchors, and loads every piece into our trucks. You get your back yard space back without risking injury or spending your weekend wrestling with rusty metal panels and termite-damaged framing.

Outbuildings and Structures We Tear Down in Kenner

High humidity, Gulf air, and persistent damp ground take a heavy toll on outdoor buildings in southeastern Louisiana. Moisture creeps up from soil into floor skids, creating subterranean termite paths and rot that soften the lower frame long before the roof shows damage. Heavy summer rains soak asphalt shingles, while intense sun makes plastic side panels brittle around screw holes. Metal sheds rust quickly along the base runner where leaves collect and hold standing water.

We dismantle and take away unpermitted structures in almost any state of decay, including:

• Wood frame sheds: Dimensional lumber framing, plywood decking, T1-11 siding, and shingle roofs that have sagged, rotted, or suffered termite damage.
• Metal storage sheds: Corrugated steel or aluminum panels on light iron frames, even when bolts are rusted solid or the bottom rails have collapsed.
• Resin and vinyl sheds: Plastic panel outbuildings with cracked walls, split roof ridge caps, or broken floor pans.
• Leaning or collapsed units: Structures compromised by fallen tree limbs, storm winds, or failed foundation blocks.
• Specialty yard buildings: Playhouses, lean-tos, chicken coops, detached carport frames, and glass or poly sheet greenhouses.

If your shed is packed with old junk, lawn mowers, or scrap material, we clear the interior contents first before starting structural teardown. We accept buildings resting on skids, patio pavers, gravel pads, or concrete slabs. If you need the concrete slab broken up and removed along with the frame, let us know during your initial call so we bring the correct breaker tools and hauling capacity.

How We Access Your Yard and Dismantle the Shed

Getting materials safely out of a residential lot requires a planned sequence. We start by reviewing the access pathway from your driveway or side gate to the work area. Our crew measures gate openings, checks fence clearances, and locates low overhead branches or overhead service drop wires before bringing any tools into the yard.

Teardown never means pulling a building down with cables or knocking it over into the yard. Controlled dismantling keeps your property safe and prevents damage to nearby fences, garden beds, or home siding. Our crew works in a strict structural order:

1. Clear contents and trim clearance: We remove stored items and cut away overhanging vines or limbs blocking access around the exterior walls.
2. Remove doors, windows, and roof coverings: We strip shingles, roofing felt, or loose top sheets to lighten the roof load and expose the framing rafters.
3. Dismantle roof structure and wall sections: Rafters come down one by one. Side walls are backed out from top plates down, keeping wood or metal panels under control as they unbolt.
4. Pull floor and ground anchors: We pry up rotted floorboards, pull metal ground augers, and lift treated 4x4 skids off footing blocks.
5. Magnet sweep and final haul: Every piece is loaded directly into our trucks. We run rolling heavy magnets across the turf to catch hidden screws, roofing nails, and rusted staples.

Working in tight spaces along property lines is routine for our team. When a shed sits right against a fence, we disassemble the frame entirely from the inside out to avoid disturbing your neighbor's yard.

Factors That Influence Your Shed Teardown Quote

Because property access and building conditions vary widely across Kenner, we do not print rigid pricing tiers. The size of the unit and its construction materials are where your estimate begins. A light vinyl tool shed comes apart much faster than a custom site-built wooden workshop with double-layer siding and heavy asphalt roofing shingles.

Several practical factors determine the total labor and disposal requirements for your project:

• Working access distance: A shed right next to a paved driveway takes less manual carrying time than one situated seventy-five feet back in a yard behind a narrow side gate.
• Structural framing materials: Heavy timber, subflooring, and shingled roofs weigh significantly more at disposal points than thin gauge sheet metal panels.
• Interior contents: Leaving old paint cans, stacked firewood, lawn equipment, or general household clutter inside adds sorting and junk removal labor to the job.
• Anchors and foundations: Lifting basic skids off concrete deck blocks takes standard labor, whereas breaking up a poured concrete slab requires specialized equipment and concrete hauling.
• Utilities present: Structures with live electrical wiring require verification that circuits are killed and lines pulled before demolition begins.

We evaluate your structure using photos or an on-site look to provide a clear written quote covering all labor, loading, hauling, and disposal fees before work starts.

Five Steps to Schedule Shed Demolition

Getting an old outbuilding removed from your property is simple when you follow our straightforward process:

1. Initial contact. Describe your shed over the phone or send us details through our website form. Tell us the building size, construction type, and basic condition.

2. Photo evaluation. Send a few wide photos showing the exterior walls, the roof line, the interior floor space, and the side yard walk path leading from your driveway to the shed.

3. Review your quote. We provide a clear estimate covering full teardown, magnet sweeping, loading, and material disposal so you know the scope before booking.

4. Site prep and clearance. Ensure any utility lines running to the structure are disconnected. Clear a path along the driveway so our crew can park near the work entrance.

5. Demolition day. Our crew arrives on time with hand tools, pry bars, saws, and safety gear. We dismantle the building, sweep for metal fasteners, load the trucks, and leave your yard clean.

Permits and Regulations for Accessory Structures

Understanding local building rules keeps your property compliant. In Louisiana municipalities, small accessory outbuildings that do not require structural foundations, electrical hookups, or plumbing lines are generally unpermitted items that homeowners can dismantle freely. However, larger permanent outbuildings or structures attached to primary dwellings may fall under specific parish rules.

AMI Junk Hauling specializes exclusively in unpermitted accessory structures. We handle free-standing sheds, small chicken coops, metal tool lean-tos, and resin storage units. We do not demolish attached garages, living quarters, commercial buildings, or structures on permanent foundations that require formal city permits or utility shut-off filings.

If your project involves disputed property boundaries, inherited real estate, or complex code enforcement notices, check local guidelines through the court system or official agency channels like the court before work begins. For standard unpermitted back yard sheds, our crew can clear the structure quickly without administrative delays.

Dismantling a Shed Yourself vs. Hiring Our Crew

Taking down an old outbuilding as a personal project might seem simple, but the physical labor and hazards often catch property owners off guard. If you own a heavy-duty trailer, reciprocating saws, crowbars, pry equipment, thick leather gloves, and have a couple of strong friends available, self-hauling a small metal building is achievable.

However, DIY teardowns frequently run into tough obstacles. Rotted framing timber heavy with moisture can collapse unpredictably once top wall plates are cut. Old asphalt shingles weigh hundreds of pounds and drop thousands of sharp granules into your lawn grass. Rusted sheet metal edges easily slice unprotected skin, and rusted fasteners pull loose unevenly, leaving exposed spike tips on the ground.

Disposal creates another major hurdle. Local residential garbage services will not take wall sections, floor plywood, or roofing materials placed at the curb. You must rent a high-capacity dumpster or make multiple trips to commercial transfer stations, paying drop fees calculated by total weight. Hiring our specialized crew eliminates injury risks, prevents damage to your fence, saves your vehicle suspension, and ensures all debris leaves your yard in a single day.

Where Demolition Debris and Materials Go

We do not dump demolished sheds mixed together into local landfills when materials can be separated. Responsible sorting takes place as the structure is torn down, splitting components into distinct handling streams:

• Ferrous metals: Steel wall panels, aluminum siding, roof metal, frame rails, and corner brackets are separated and taken to scrap metal processors.
• Clean structural lumber: Untreated pine framing studs and joists that remain sound are set aside for wood waste processing or biomass chipping.
• Mixed construction waste: Pressure-treated skid beams, rotted subfloor plywood, and weathered exterior T1-11 sheathing go to approved construction and demolition facilities.
• Asphalt materials: Old roofing shingles and felt underlayment drop into dedicated heavy waste loads for regional processing.
• Plastics and vinyl: Molded resin wall panels and floor bases go to targeted landfill streams since mixed composite plastics cannot go to standard scrap yards.
• Concrete fill: Broken pier blocks or slab concrete are delivered to local aggregates facilities to be crushed into recycled road base.

Is Your Old Back Yard Shed Ready to Come Down?

Homeowners, property managers, and real estate sellers across the city call us when an aging outbuilding becomes a hazard or stands in the way of yard improvements. Whether you are clearing space for a new fence, opening up your lawn for landscaping, or addressing safety warnings from an insurance inspector, our crew handles the heavy tear down efficiently.

We supply all tools, labor, loading equipment, and material hauling needed to clear your lawn completely. Send photos of your structure through our fast online quote form, or call our team mid-sentence today at (318) 531-3627 to discuss your project details and set up your job date.