Shed Removal in Longmont, CO



Most backyard sheds sitting in yard corners along the Front Range were built to store lawn equipment, patio furniture, and garden tools. Over two decades of high-altitude sun exposure, severe temperature shifts, and heavy spring snow accumulation, these outdoor structures slowly lose their integrity. Fasteners loosen, asphalt shingles dry out and shed granules, and timber frames shift off their original foundations.
What starts as a small door sag eventually turns into a compromised structure. Owners often find themselves with an unserviceable building that collects pests, blocks property improvements, or triggers notices during home sales. The difficulty comes down to dismantling a frame safely without damaging neighboring property lines or surrounding landscape features.
Our tear-down team dismantles failing, rotting, or leaning outbuildings piece by piece. We clear out old contents, dismantle the frame systematically, and haul away every material fraction so your yard space is clear and clean for your next home improvement project.
- Population
- 98,282
- County
- Boulder County
- Nearest landmark
- Roosevelt Park
- Climate zone
- Platte Drainage Basin
Outbuilding Conditions and Teardown Scope in Longmont
Intense ultraviolet radiation at elevation degrades asphalt roofing shingles and resin roof panels across Northern Colorado. Once shingles curl and crack, moisture from rapid freeze-thaw cycles enters the structural framing below. Water sits against the bottom sill plates, rotting untreated dimensional lumber and expanding existing cracks in floor joists during winter freezing. By spring, heavy wet snow creates downward pressure on weakened trusses, leading to sagging roofs, racked wall frames, and stuck doors.
We take down unpermitted structures regardless of their structural state. Our crews handle wood-frame outbuildings on skids, sheet metal tool sheds, vinyl storage units, and custom site-built structures set on concrete blocks. We accept structures in every stage of degradation:
- Standing storage sheds with dry rot, missing shingles, or warped wall panels.
- Structures leaning out of square due to ground movement or compromised corner posts.
- Partially collapsed or fully flattened buildings resulting from windstorms or heavy snow loads.
- Outbuildings crushed by fallen tree branches or severe storm debris.
- Sheds fully packed with left-behind lawn tools, trash, or accumulated junk.
We do not take down structures attached to primary dwellings, multi-story barns, or any building requiring active utility disconnection. If a shed has active electrical lines, gas pipes, or plumbing connected to it, those utilities must be safely unhooked by a qualified specialist before our tear-down crew arrives on site. Structures constructed with suspected asbestos siding or roofing shingles are also excluded from our service scope for safety reasons.
Shed Dismantling and Ground Clearance Procedures
Access failures usually happen when someone attempts to pull a structure down all at once with cables or heavy equipment. Drop zones are rarely wide enough in residential yards, and pulling a structure risks damaging adjacent fences, nearby trees, or neighboring structures. Tight side gates, concrete patio steps, and overhead tree branches mean that machines cannot reach the back yard. Manual teardown and controlled piece-by-piece dismantling remain the safest options.
Our team works backward from the top down. We empty any remaining interior contents before taking down the building frame. Once the inside is empty, we remove windows and doors, strip away asphalt shingles or roof metal, and dismantle the roof trusses. We then drop the wall panels inward into the shed footprint rather than outward toward property lines. Finally, we take apart the plywood floor subfloor, cut through joists, and pull any ground anchors or ground augers securing the base skids.
Every piece of wood, metal, and plastic gets loaded directly into our haul trucks. After all structural debris is loaded, crew members conduct a thorough magnet sweep across the grass, gravel, and dirt pathways to pick up loose nails, structural screws, and metal bracket pieces.
Factors That Determine Outbuilding Disposal Pricing
We do not publish fixed price lists or standard flat rates because every teardown job presents unique physical requirements. Estimating a job relies on structural materials, overall footprint size, and the labor required to move material from the work zone to our waiting truck. The main physical factors that influence your project quote include:
- Structure size and height: Larger square footage creates a greater volume of framing lumber, plywood sheathing, and wall material to process.
- Construction material: Lightweight sheet metal panels disassemble quickly, whereas thick double-walled timber construction with heavy asphalt shingles demands significantly more hand labor and disposal weight.
- Current structural integrity: A leaning or partially collapsed frame requires careful controlled disassembly to protect crew members and property, which affects time on site.
- Working space and carry distance: If our truck cannot park near the structure, workers must carry debris through narrow gates or around obstacles, increasing total labor hours.
- Foundation anchors and slabs: Standard wooden skids lift out easily, whereas removing heavy concrete piers or breaking up concrete pads adds extra labor and disposal requirements.
How to Schedule Your Shed Removal Step by Step
Getting your back yard cleared is a straightforward, organized process from start to finish. Follow these practical steps to get your project moving:
1. Initial inquiry. Reach out through our simple online form or call our team directly to submit your project details.
2. Share clear photographs. Send pictures showing the structure from multiple angles, including the surrounding yard, gate openings, and side pathways.
3. Review your upfront quote. We review the dimensions, material type, and property access paths to provide an accurate written estimate before scheduling.
4. Reserve a project date. Select a convenient calendar day for our crew to arrive equipped with pry bars, reciprocating saws, safety equipment, and magnetic sweepers.
5. Crew performs teardown. Our team systematically dismantles the outbuilding, safely handles structural components, and carries all sorted material to the truck.
6. Final yard inspection. We clear smaller debris, run magnetic sweeps to catch hidden metal fasteners, and walk the finished site with you to confirm complete cleanup.
Permit Requirements and Service Limits for Outbuildings
Understanding local building requirements helps ensure your property cleanup stays fully compliant with local authorities. Small detached accessory buildings under specific square footage limits generally do not require formal demolition permits. However, exact threshold sizes, property line setbacks, and structural rules vary by municipality.
Our service focuses exclusively on unpermitted accessory structures that homeowners can legally take down without pulling formal demolition approvals. You can check local structural limits through the Colorado General Assembly statutory resources or by contacting your city building department.
Homeowner association rules may also govern how quickly an outbuilding must be removed or replaced once teardown begins. Before booking service, confirm your property boundaries and verify that any active power leads have been disconnected at the main breaker box by a certified electrician.
Diy Shed Disassembly Versus Hiring a Hauling Crew
Taking down a storage shed on your own can seem like a budget-friendly project if you already own basic tools and have time over a weekend. If the building is small, made of lightweight resin, and you own a truck or utility trailer, self-hauling allows you to work at your own pace. However, many DIY attempts run into unexpected difficulties once work starts.
Asphalt shingles add severe weight, and rotted floor panels often collapse underfoot during removal. Cutting through nail-embedded framing timber quickly ruins standard saw blades, while rusted metal siding creates sharp hazards. Once down, fitting bulky framing posts and full plywood sheets into a standard pickup bed takes multiple round trips to regional disposal transfer stations, where commercial weight fees apply.
Working with AMI Junk Hauling saves physical labor and eliminates project delays. Our team arrives with specialized cutting tools, heavy-duty pry bars, magnetic sweepers, and large-capacity haul trucks. We take down the building safely, handle loading, pay disposal fees, and clear your yard in a single structured visit.
Recent Yard Cleanout Project in Northern Colorado
A residential homeowner had an aging eight-by-ten-foot wooden storage shed sitting at the back corner of their lot. Over several seasons of heavy winter snow accumulation and intense summer heat exposure, the asphalt shingle roof had failed, leading to internal water intrusion. The bottom wood skids were deeply embedded in damp soil, floor joists were rotting, and the frame had racked several inches out of square, making the double doors impossible to shut.
The homeowner needed the old structure removed to clear space for a new concrete patio and replacement fence. Access was constrained by a six-foot side privacy gate and a delicate garden bed running along the property line. Heavy machinery could not enter the yard without causing costly damage to existing landscape features.
Our crew cleared out forgotten gardening tools and broken lawn equipment left inside the structure. Working inward from the roof down, workers stripped the asphalt shingles, unscrewed wall sheathing, and collapsed the wall frames onto the floor pan. The team cut the rotted runners, loaded all debris into our truck within four hours, and finished with a magnetic sweep that recovered scattered nails from the grass.
Who Uses Our Outbuilding Disassembly Service?
Homeowners, property landlords, and real estate buyers across Northern Colorado turn to us when failing outbuildings become a liability. Property sellers frequently call us after a home inspector flags an unstable or rotting structure that must come down before closing. New buyers rely on our team to remove inherited sheds to free up space for fresh landscaping, dog runs, or custom patios. Landlords trust us to dismantle unpermitted structures left behind by former tenants, while long-time residents call us when heavy spring snow or strong winds finally compromise an aging garden shed.
Whether your storage building is rotting at the sill, leaning against a property line fence, or already collapsed into a pile of boards, our crew handles the heavy tear-down labor, sorting, loading, and ground cleanup safely. Send photos of your structure through our online form, or call our team today at (888) 371-8120 to get a fast, written estimate for your property cleanout.
Shed Removal & Demolition in Longmont: questions
Do I need to clear out the shed before your crew arrives?
Do I need a permit to take down my backyard shed?
Can you take down a shed that has already collapsed?
What happens to the wood, metal, and roofing material?
Will your crew leave stray nails or sharp debris in my grass?
Can you remove a concrete pad under the structure?
Nearby towns we serve
- Niwot, CO
- Mead, CO
- Gunbarrel, CO
- Erie, CO
- Firestone, CO
- Frederick, CO
- Dacono, CO
- Berthoud, CO