Shed Removal in Shoreview, MN

AMI Junk Hauling Truck
Full Shed Removal & Debris Cleanout! 🏚️FREE ESTIMATE
AMI Removal Specialist with Crowbar
Torn Down Board-by-Board • Spotless Yard ✨(651) 505-8742
AMI Removal Specialist with Dolly
SCROLL DOWN TO CALL THE CREW

An old shed on your property usually reaches a point where it is no longer usable. The doors bind on the frame, water leaks through the shingles, and the wood near the ground turns soft. It sits in the backyard taking up space, holding rusted tools, or leaning against a fence line. Leaving it in place only allows the frame to weaken further under winter snow.

Our team handles complete shed teardown and haul-away for home and property owners in Shoreview, MN. We do not try to drag an entire structure onto a flatbed. We take the building apart piece by piece, beginning at the roof and working down to the skids or floor joists. Every panel, wall stud, and rafter is dismantled on site.

We load all the resulting lumber, metal siding, and roofing material directly into our trucks. You are left with a clear, open backyard pad without the physical work or safety hazards of doing the demolition yourself. AMI Junk Hauling makes the entire process straightforward from start to finish.

Population
26,686
County
Ramsey County
Nearest landmark
Karth Lake 0.3 mi
Climate zone
East Central

Yard Structures We Tear Down and Accept in Shoreview

Sheds in this region face harsh weather patterns that break down building materials from two directions. Winter brings extended freezing temperatures and heavy snow accumulation on roof panels. Summer brings high humidity, rain, and warm ground moisture. This cycle forces moisture deep into untreated framing, floor plywood, and bottom sill plates. Over time, the timber rots from below while ice expansion pulls roof fasteners loose and warps the framing out of square.

In the initial years, the structural damage is hidden beneath the floorboards. Water sits in the shadows under the floor joists where air cannot circulate. The wood softens, attracting carpenter ants and mice. The skids sink into the soft earth, causing the walls to rack. Doors begin to stick, and small gaps appear along the roofline.

By the third or fourth year of heavy frost heaving, the structural integrity is compromised. The roof ridge sags under ice loads, and plywood siding delaminates near the ground line. Fasteners pull through rusted metal panels, and the entire structure may begin to lean to one side, making simple repairs impractical.

By the tenth year, the building is often partially collapsed or completely unsafe to step inside. We handle shed teardown jobs at every stage of decay across Shoreview, MN. We accept wood frame buildings on runners, metal storage units, vinyl sheds, lean-tos, and detached garden structures regardless of their structural rot. We also handle structures that have already suffered partial roof collapse or heavy wind damage. If the building is filled with abandoned lawn tools, old lumber, or scrap items, we clear out the contents as part of the overall job.

Navigating Backyard Access and Tear-Down Logistics

The most common complication during a shed disposal project is limited physical access around the structure itself. Sheds are frequently constructed inches from a rear property fence, tucked under mature tree branches, or jammed into a tight corner behind a garage. When space is constrained, our crew cannot simply drop a wall flat onto the grass. Doing so risks crushing adjacent fencing, damaging flower beds, or breaking nearby window glass.

We solve access issues by adjusting our demolition sequence to fit the yard layout. First, we clear all loose contents from inside the space to create working room. Next, we strip the asphalt shingles or unscrew the metal roof panels to relieve overhead weight. We then unframe the rafters individually before tackling the walls. If a wall sits directly against a wooden property fence, we unbolt or pry the exterior siding away from the inside of the frame, taking the wall down piece by piece into the center of the footprint.

Our crew uses sawzalls, wrecking bars, pry tools, and heavy sledgehammers to break dimensional lumber and plywood into manageable sections. Nothing is dragged across your lawn in large intact walls that could tear up turf. Every board is carried by hand through your gate or along your side yard to our parked haul vehicle.

Once the walls and roof are cleared, we pull up the floor deck and cut through the runners. We locate ground augers, rebar stakes, or anchor bolts securing the base to the earth. After all building materials are loaded into our truck, we run a magnetic sweep over the entire area to pick up stray nails, screws, and metal bracket fragments.

Factors That Determine Your Shed Demolition Estimate

The cost of taking down and removing a yard structure depends on several physical factors specific to your project. Seasonal conditions play a role, as winter snow accumulation or frozen ground around the base of the structure can increase the labor required to pull anchor pins, access buried floor joists, or clear paths for carrying debris to the street.

The size and total footprint of the building directly influence the labor hours and volume of material created. A small six-by-eight metal unit yields significantly less weight and bulk than a twelve-by-sixteen site-built timber building with double-layered shingle roofing. Wall height and roof pitch also affect how quickly our crew can safely dismantle the upper structure.

Construction materials change the disposal overhead. Heavy asphalt shingles and thick plywood subfloors add substantial weight, which increases transfer site tipping charges. Conversely, thin sheet metal buildings are lighter, though they require careful unscrewing and cutting to avoid sharp edges during transport. If your shed sits on a concrete slab that you want removed, or if it is held by heavy concrete footings, breaking up that masonry requires specialized hammers and adds heavy aggregate to the haul load.

Finally, working distance and interior contents shape the job. A structure packed to the rafters with old paint cans, firewood, or broken equipment requires extra labor to sort and clear before demolition starts. Long carry distances from the backyard out to our haul truck also add time to the service.

How to Schedule Your Shed Teardown Project

Getting your old yard structure removed is a straightforward process when you work with our local team. Follow these steps to prepare your property and schedule the job:

1. Take photos of the structure. Step outside and take a few clear photos of the shed from different angles. Capture the overall size, the condition of the roof and walls, and the path leading from the shed to your driveway or street.

2. Contact our team. Send us your photos and job details through our site form or give us a call. Describe any interior contents that need clearing and let us know if the structure has an asphalt roof, concrete base, or electrical wiring attached.

3. Receive your written quote. We review your photos and project details to calculate a clear, comprehensive quote for the labor, teardown, material sorting, and haul-away fees. You know the cost before work begins.

4. Clear an access path. Before our crew arrives, move cars, outdoor furniture, or lawn toys away from the path between the shed and the driveway. Make sure gates are unlocked and pets are secured indoors.

5. Watch the teardown proceed. Our crew arrives with all necessary hand tools, power saws, and safety gear. We strip the roof, take down the walls, dismantle the floor frame, and load everything into our haul vehicle.

6. Inspect the cleared site. Once the structure is removed, we sweep the yard with a heavy magnet to pick up nails and stray hardware. You inspect the clean, open yard space and finalize the appointment.

Permit Limits and Structure Rules in Minnesota

Our service focuses on unpermitted accessory buildings and detached yard structures. We specialize in taking down standalone storage sheds, playhouses, chicken coops, garden lean-tos, and open carport frames. We are not a licensed general demolition contractor, and we do not undertake projects that require formal municipal building teardown permits, structural engineering reviews, or complex utility capping.

If your structure sits on a poured concrete foundation, has active electric or gas lines connected to it, or exceeds local unpermitted footprint limits, a formal permit from your local building department is typically required. In those situations, the work must be handled by a licensed demolition contractor who can file paperwork and coordinate utility shutoffs. You can verify property rules and state legal standards through the district court statutes online.

We do not dismantle attached garages, primary residential dwellings, commercial buildings, or any structure containing asbestos siding or insulation. For standard wood, metal, or plastic storage units without attached utilities, our crew provides a quick, effective teardown service. We clear the building cleanly while strictly adhering to local regulations regarding unpermitted outdoor structures.

Dismantling the Structure Yourself Versus Hiring Our Crew

Tearing down a shed on your own can be a sensible choice if you have the right tools, a suitable vehicle, and physical help. If you own a small metal or resin shed that unscrews easily, have an utility trailer, and can haul materials directly to a local disposal facility, tackling the project yourself saves on labor expenses. It is a manageable weekend project for someone comfortable using power tools and handling heavy timber.

However, self-demolition frequently turns out to be more difficult than expected when dealing with aged wooden sheds. Weathered lumber does not come apart neatly. Nails rust and snap off, forcing you to cut through stubborn framing with a reciprocating saw. Asphalt roofing shingles are heavy, sharp, and crumble into thousands of messy granules as you tear them away. Handling these materials without commercial safety equipment risks cuts, eye injuries, or back strain.

Disposal creates another obstacle for DIY projects. A standard eight-by-ten wood shed fills a pickup truck bed three or four times over. That means making multiple trips to a transfer station, paying separate disposal fees for weight loads, and spending hours loading and unloading heavy, nail-studded timber. Renting a dumpster adds delivery fees and leaves a heavy container sitting on your driveway for days.

Hiring AMI Junk Hauling eliminates these headaches completely. Our crew arrives with high-capacity trucks, commercial-grade tools, and the experience needed to collapse walls safely in tight yard spaces. We tear down the building in hours, sweep up loose nails, and haul all the debris away in a single trip.

A Typical Teardown Job Following a Minnesota Winter

Early spring in Shoreview, MN, brings a high volume of shed removal requests after heavy winter snow loads expose hidden structural damage. A typical project involves a ten-by-twelve foot wood frame shed built on pressure-treated 4x4 skids resting over gravel. Over several seasons of frost heaving and melt cycles, the ground beneath the skids shifted, causing the center of the floor to sag and the roof ridge to crack under heavy snow pack.

By the time the snow melts, the homeowner discovers the rear wall leaning heavily toward a shared wooden privacy fence. Water running off the roof line has rotted the bottom wall plates, making the structure unstable and unsafe to enter. The owner needs the collapsed building removed before installing new backyard fencing along the property line.

Our two-person crew arrives equipped with reciprocating saws, pry bars, flat shovels, and a magnet roller. Because the rear wall sits within six inches of the neighbor's fence, we work entirely from inside the shed footprint. We pull off the compromised asphalt shingles, cut the roof rafters free, and lower them individually. Next, we unframe the front and side walls, folding the leaning rear wall inward away from the fence without touching the property boundary.

We cut the floor joists into six-foot lengths, pull up the rotten skids, and load all timber, plywood, and roofing debris into our truck. The entire teardown takes less than four hours. We finish by raking the gravel pad and rolling a magnet across the grass to clear every nail and bracket, leaving a clean, open space ready for the fence installer.

Is an Old Shed Taking Up Space in Your Yard?

Property owners across Shoreview call on us when an outdated or decaying structure gets in the way of their outdoor plans. Homeowners replacing a rotten shed with a new model, buyers who inherited a falling-down structure with a recent home purchase, and landlords cleaning up rental yards frequently rely on our teardown team. We also help families prepare property for new fencing, landscaping overhauls, or home sales where an inspector flagged an unsafe accessory building.

Taking down a heavy timber or sheet metal structure without tools and large vehicles is dangerous and exhausting. Let our experienced crew handle the heavy lifting, roof stripping, frame cutting, and haul-away for you. Send us a message through the form on this page, or call us directly at (651) 505-8742 to get your free estimate and schedule your shed removal appointment today.

Shed Removal & Demolition in Shoreview: questions

Do I need to empty the shed before your crew arrives?
You do not have to clear out the contents yourself. We offer complete cleanout services alongside structure demolition. If your shed is packed with old yard tools, broken furniture, lawn mowers, or scrap lumber, let us know when requesting your estimate. Our team will clear out the contents, sort the items, and then proceed with dismantling the building frame.
Do you remove the concrete slab underneath the shed?
We can take up and haul away concrete slabs, but that work must be requested when getting your quote. Removing a concrete pad requires breaking equipment and adds heavy aggregate weight to the disposal load. Most customers prefer to leave the slab intact for a future shed or patio, but if you want the concrete broken up and removed down to dirt, we can include it in the project scope.
How do you handle floor frames and ground anchors?
We dismantle the floor decking and cut the support joists into manageable pieces for loading. If your shed is anchored to the earth with augers, rebar stakes, or concrete piers, we pull or unbolt those fasteners. If anchor posts cannot be pulled cleanly from the soil, we cut them off below ground level so no dangerous metal sticks out of your yard.
Can you dismantle a shed that has already collapsed?
Yes, we frequently remove collapsed or storm-damaged buildings. A collapsed structure requires extra care because weight distribution is unpredictable and jagged wood or metal edges are exposed. Our crew wears protective gear and systematically lifts, cuts, and loads the flattened panels and broken framing until the entire site is clear.
Do I need a permit for shed removal in Shoreview?
For standard detached accessory sheds without plumbing or electrical connections, local building departments generally do not require a demolition permit. However, if your structure exceeds local unpermitted footprint thresholds or sits on a permanent foundation with power lines, a permit is typically required. Where a permit is required, the job belongs to a licensed demolition contractor. We handle unpermitted structures and advise checking with your local building department if you are unsure about your shed's status.
What if there is electricity or power run to the shed?
We cannot dismantle structures with active electrical connections or gas lines. All utilities must be completely disconnected and capped by a qualified electrician or plumber before our crew sets foot on the property. Once the lines are certified dead and disconnected from the main panel, we can safely proceed with taking down the physical structure.
Will you leave nails or metal scrap in my yard?
No, keeping your lawn safe for children, pets, and lawnmower tires is a high priority. After all the large lumber, panels, and joists are loaded onto our truck, we perform a thorough cleanup of the work site. We use a heavy-duty rolling magnet across the yard and around the shed footprint to gather loose nails, screws, staples, and metal brackets.
Is a metal shed cheaper to remove than a wooden shed?
Metal sheds are often lighter than thick wooden structures with asphalt roofs, which can make loading faster and lower disposal weight fees. However, metal panels can be time-consuming to unbolt or cut safely if they are rusted or bent. We evaluate the construction material, footprint size, and access constraints to determine a fair quote for either material.

Get a quote in Shoreview

Tell us what you have and where it sits. We handle the loading.

No obligation. We come to you and quote on the spot.

Nearby towns we serve

  • Arden Hills, MN2.0 mi
  • New Brighton, MN2.8 mi
  • Mounds View, MN3.5 mi
  • North Oaks, MN3.7 mi
  • Vadnais Heights, MN3.9 mi
  • Lexington, MN4.4 mi
  • Little Canada, MN4.6 mi
  • St. Anthony, MN4.7 mi

Other services in Shoreview

Explore